Use and Care Manual

OverDryve

™

Pro User Manual 2

1. Your OverDryve

™

Box Contents

• OverDryve

™

tablet

• Smart mount

• Anti-glare screen protector

• Bracket with suction cup

• FM transmitter antenna

• Dash mount disc

• AUX cable

• Vehicle charger

• USB wall charger

• SiriusXM antenna

Install the Mount

Note: Follow all local regulations governing the placement of the mount.

1. Select an area with a line of sight to the sky and GPS satellites.

2. Clean and dry the mounting area.

3. Remove the suction cup protective lm.

4. Attach the two pieces of the mount together and lock into place.

5. Adjust the angle of the mount.

6. Pull the suction cup lever up to release suction.

7. Plug the power cord into the mount and the vehicle’s 12-volt

power source.

8. Optional: To use your vehicle’s speakers, connect an AUX cable from the

Smart Mount AUX out to your vehicle’s AUX in port.

9. Optional: To use the SiriusXM satellite radio features, see the instructions

in Section 11 (Entertainment).

10. Place and hold the mount suction cup against the

mounting surface.

11. Press the suction cup lever down until it snaps into place.

12. Snap the tablet onto the mount.

13. Adjust the tablet so that it can be easily seen and does not

block the driver’s line of sight.