Bike Mount Install Guide © 2013 Rand McNally. All rights reserved.
Attaching the Bike mount 1. Push up on the lever at the top of the mount to release the lock. 4. Once in place, the mount holds securely to the handlebar. Note: To mount to the stem, remove the screws, rotate the bracket 90 degrees, and replace the screws. 2. Wrap the strap around the handlebar and reinsert the locking lever. 5. Slide the device onto the bracket until it clicks into place. 3. Adjust to fit as necessary by releasing the tab in the middle of the bracket and pulling the strap. 6.
