Quick Start Manual

ATTACHING THE BIKE MOUNT
1. Push up on the lever
at the top of the mount
to release the lock.
2. Wrap the strap around
the handlebar and
reinsert the locking lever.
3. Adjust to fit as necessary
by releasing the tab in
the middle of the bracket
and pulling the strap.
4. Once in place, the mount
holds securely to the
handlebar.
Note: To mount to the
stem, remove the screws,
rotate the bracket 90
degrees, and replace
the screws.
5. Slide the device onto
the bracket until it
clicks into place.
6. To remove the device,
press down on the tab
at the bottom of the
bracket and slide off.