User manual

Road Explorer
™
70 User Manual 2
What’s Included
Rand McNally Road Explorer
™
70
• Two-piece mount:
- Magnet with GPS boost
- Bracket with suction cup
• Quick Start Guide
• Anti-glare screen protector
• Vehicle charger
• Wall charger
• USB cable
1. Your Device
Install the Mount
Note: Follow all local regulations governing the placement of the mount.
1. Select an area on the vehicle’s windshield that has a line of sight to
the sky and GPS satellites.
2. Clean and dry the mounting area.
3. Remove the suction cup protective film.
4. Attach the two pieces of the mount together and lock into place.
5. Pull the suction cup lever up to release suction.
6. Place and hold the mount suction cup against the
mounting surface.
7. Push the suction cup lever down towards the windshield until it
snaps into place.
8. Snap the tablet onto the mount.
9. Adjust the angle of the mount using the thumbscrews so that it can
be easily seen and does not block the driver’s line of sight.
10. Plug the power cord into the mount and the vehicle’s 12-volt
power source.