Owner's Manual

Rand McNally RVND
™
7720 User Manual 2
What’s Included
• Rand McNally RVND
™
7720
• Windshield mount with suction cup
• Quick Start Guide
• Wall charger
• Vehicle charger
• USB cable
Charge the Battery
First Time Use
To maximize battery life, plug in your device for the first two (2) hours
of use. Use the:
• Home charger to power the device from a wall outlet, or
• Vehicle charger to power the device from the battery.
Note: The vehicle may need to be on for the device to charge.
1. Your Device
Install the Mount
Note: Follow all local regulations governing the placement of the mount.
1. Select an area with a line of sight to the sky and GPS satellites.
2. Clean and dry the mounting area.
3. Remove the suction cup protective film.
4. Adjust the angle of the mount using the thumbscrews.
5. Pull the suction cup lever up to release suction.
6. Plug the power cord into the device and the vehicle’s 12-volt
power source.
7. Slide the device onto the mount.
8. Place and hold the mount suction cup against the
mounting surface.
9. Press the suction cup lever down until it snaps into place.
10. Adjust the device so that it can be easily seen and does not
block the driver’s line of sight.
Press down
to hold
Slide up
to mount
Thumbscrews