User’s Guide Version 2.0.
Trademarks Rand McNally and IntelliRoute are registered trademarks and TND is a trademark of Rand McNally. NAVTEQ ON BOARD is a trademark of NAVTEQ. The Trucker’s Friend and National Truck Stop Directory are registered trademarks of TR Information Publishers. Truck Down is a registered trademark of Truck Down, Inc. InfoGation is a registered trademark of InfoGation Corporation. Other products and companies mentioned herein may be trademarks of their respective owners.
FCC Notice This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
Contents Basic Operation Trademarks ......................................................................................ii Start the IntelliRoute® TND™ .........................................................13 FCC Notice ......................................................................................iii The Main Menu ...................................................................................14 Tapping the Screen .........................................................................
Destination Search Auto-Complete Feature ............................27 About City Street Names ................................................................28 Expand Search for Street Names ..................................................28 Select a City .........................................................................................29 Find Addresses ...................................................................................30 Location Selection Window ................................
Add Locations to a Multi-Stop Route .........................................66 Virtual Dashboard .............................................................................85 Remove a Stop from a Route ........................................................67 Show/Hide the Virtual Dashboard .......................................86 Select and Run a Saved Route ......................................................68 Gather Trip Information ..........................................................
Calculate a Mileage and Driving Time ..................................... 101 View Rand MCRA Atlas Information ........................................ 102 Send a Message to Rand McNally ............................................ 103 Send a Message About Your Current Location ............. 103 Add a Custom POI Location Method 1 (Latitude/Longitude) ............................................................ 121 Add a Custom POI Location Method 2 (Street Address) ........................................
Welcome Your IntelliRoute® TND™ 710 1 1 9 2 2 Stylus (in cradle) Use the stylus to select options on the touch screen. 3 3 Micro SD Card Slot Provides additional storage. 4 5 6 7 Power Key Turns the device On, Off, and used to enter/return from Standby mode. 4 Mini-USB Port Connects to a power source (computer, car charger, or wall charger). Also used for updates using TND Dock . 5 Audio Output Socket Connect to external speaker (not provided).
About GPS The Global Positioning System (GPS) is a constellation of satellites that a GPS receiver uses to calculate geographical positions. To determine a position, data from at least three satellites is required. To determine altitude, the data from four or more satellites is required. Accuracy of the positioning varies from 10 feet to several hundred feet, depending on vehicle placement and the surrounding environment.
Customer Support Call toll-free: 800-333-0136 Service hours: Monday through Friday, 8 a.m. to 5 p.m. CT (except official holidays) E-mail: TNDSupport@randmcnally.com Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Getting Started What’s Included Your IntelliRoute® TND™ 710 includes: • IntelliRoute® TND™ 710 navigation device • Mount and cradle • 12V truck charger with extended length cable • Home charger (100/240V) • USB cable • Extra fuse • Quick Start Guide Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Important Safety Information Navigation Safety Caution: Use this navigation device at your own risk. Caution: Use this navigation device only when it is safe to do so. Caution: Look at the display only when it is safe to do so. Caution: Traffic regulations always have priority over any instructions from the navigation system. Caution: Follow navigation system instructions only when local regulations and road traffic allow you do so.
Installation Safety Caution: Make sure that the mount does not impair the driver’s visibility. Caution: Do not attach the mount within the airbag deployment zone. Caution: When installing the mount, make sure that it does not pose a risk in the event of an accident. Caution: Do not run cables directly next to safety-relevant devices and power supplies. Caution: After installation, check all safety-relevant equipment in the car. Caution: Connect the wall charger to a 120V or 240V outlet only.
Device Safety Caution: Do not use sharp-edged objects on the device touch screen. Caution: The device is not waterproof and is not protected against water damage. Caution: Protect the device from extreme temperatures. Operating temperature for the device is between 32 degrees F and 120 degrees F. Caution: When parking the vehicle for an extended time, to avoid battery drain, hold down the power button for 10 seconds to power off the device.
Battery Power Light When the device is charging, the power light on the front of the device displays the status of the built-in battery: Battery Power Light No Light Device is running on the battery. Battery power is sufficient. Green Device is plugged in and the battery is fully charged. Red Device is plugged in and the battery is charging. Note: The red battery light may display when a fully charged device is plugged into the charger. This is normal behavior.
Charge the Battery Charge with the Wall Charger Note: The IntelliRoute TND 710 requires two amps to charge. Third party chargers (such as for cell phones or other devices) that typically supply only one amp will not charge your device. First Time Use To maximize battery life, plug in the IntelliRoute® TND™ 710 for the first two (2) hours of use. Use the: • Home charger to power the device from a wall outlet, or • Vehicle charger to power the device from the battery. Charge with the Wall Charger 1.
Install the Cradle and Mount Select an area with a line of sight to the sky and GPS satellites to ensure reliable GPS information. Note: Obey all local regulations governing the placement of the mount. Note: Do not place the mount in an airbag deployment area. 1. Clean and dry the mounting area. 2. Remove the suction cup protective film. 3. Adjust the angle of the mount using the thumbscrew and slide the mount onto the cradle. 4. Pull the suction cup lever up to release suction. 5.
Power the Device Note: To maximize battery life, plug in the IntelliRoute® TND™ 710 for the first two (2) hours of use. See “First Time Use” on page 9. Turn the Device On • Press and hold the Power Key for two (2) seconds, then release. (After 5-10 seconds, the Rand McNally splash window displays as the device powers on.) Turn the Device Off • Press and hold the Power Key for five (5) seconds, then release. A message displays indicating that the device is powering off.
Reset the Device Note: This feature is not available on all models. Resetting the device restores some settings back to their original settings and restarts the device. When you reset the device, your current route information is lost. Address Book entries, trips, settings, ratings, and messages to Rand McNally are not affected. • Use a paper clip to press the reset button located on the side of the device case. Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Basic Operation Install TND Dock Window Start the IntelliRoute® TND™ 1. Press and hold the device Power Key for two (2) seconds. (Device powers on in 5 seconds.) 2. On first use and occasionally on subsequent use, the Install TND Dock Window displays. 3. Tap OK. The Warning and Legal Consent Window displays. 4. To view Frequently Asked Questions (FAQs), tips, or a short tutorial on device use, tap Tutorial & Tips. Warning and Legal Consent Window 5.
The Main Menu Different buttons display on the Main Menu, depending on whether the vehicle type is set to Truck or Car. See “Select Truck or Car Mode” on page 21. Truck Mode 1 2 3 1 Battery Power Icons shown in this area indicate battery power status. When on battery, indicates battery power is sufficient. When on battery, indicates battery power is low. 4 5 2 6 Load Option Select the trailer load option. Note: Not Available in Car mode.
Tapping the Screen Fields You can tap many areas on the IntelliRoute TND 710 screen to select options or view more information. These include: Buttons On many windows tapping a button selects an option or goes to another page. An example would be Choose Destination on the Main Menu. Tap this button to display the Destination Selection Window and search for locations. Fields On some windows, fields can be tapped to view more information.
Using Keyboards ABC Keyboard Software keyboards are used when entering text. See “Select a Keyboard Type” on page 18 Special Keys Tap to search for a location by ZIP code. Return to previous window. QWERTY Keyboard Tap to view a longer list of names matching the typed characters. Tap to view a list of previously selected locations. Add a space. Delete last character and move back one space. Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Basic Settings Driver Status Field Driver Status Select Driver Status Note: Only available in Truck mode. See “Select Truck or Car Mode” on page 21. From the Main Menu: • Tap on the driver status. Note: An Automatic Mode setting lets you specify if the driver timers can be set automatically based on vehicle movement. (See page 110). However, when the driver status is set to Automatic mode, tapping a driver status buttons on the Main Menu temporarily overrides the automatic setting.
Language Setting Select a Language From the Main Menu: 1. Tap Preferences. 2. Tap on the Device tab. 3. 4. Tap and to view the options. Tap on the Language option and select a language. 5. Tap Back to save changes. Keyboard Setting Select a Keyboard Type For more information, see “Using Keyboards” on page 16. From the Main Menu: 1. Tap Preferences. 2. Tap on the Device tab. 3. 4. Tap and to view the options. Tap on the Keyboard option and select the keyboard type. 5.
Volume Settings Set the volume for spoken navigation instructions. . Volume Controls Increase Volume • Tap . Decrease Volume • Tap . Mute Spoken Instructions Mute Softer Louder • Tap . Button changes to . UnMute Spoken Instructions • Tap Rand McNally IntelliRoute® TNDTM 710 User’s Guide . Button changes to Version 2.0.1 .
Set Truck Information Note: Only available when in Truck mode. Truck Info Window The IntelliRoute® TND™ 710 uses truck information to calculate a route for your specific type of truck and load. For more, see “Truck Information” on page 109. From the Main Menu: 1. Tap Truck Tools > Truck Info. 2. Tap and to view the options. 3. Tap the option to be set. 4. Enter the new information. 5. Tap Back to save changes.
Select Truck or Car Mode Vehicle Mode Setting Select the type of vehicle. The IntelliRoute® TND™ 710 calculates routes based on this type of vehicle. When Car/Light Truck is selected, some truck-related features are not available. When set to Truck, routing is calculated for the specified truck and load. (See “Set Truck Information” on page 20. Also, when set to Truck, the driver status setting controls how timers are calculated. From the Main Menu: 1. Tap Preferences. 2. Tap on the Truck tab.
Set to Calculate Shortest Route or Fastest Route Set Route Type Option Set the IntelliRoute® TND™ 710 to calculate the fastest route to a location. For more routing options, see “Route Options” on page 112. From the Main Menu: 1. Tap Preferences. 2. Tap on the Route tab. 3. Tap and to view the options. 4. Tap on the Route option and select the route type. 5. Tap Back to save changes. Select a Voice for Spoken Instructions Voice Setting Note: Male voice (Tom) is only available in English.
Select a Vehicle Icon From the Main Menu: Device Window - Truck Icon Option 1. Tap Preferences. 2. Tap on the Device tab. 3. Tap and to view the options. 4. Tap on theTruck Icon or Car Icon option. 5. Tap and to view all vehicle icon options. With the selected vehicle icon displayed: 6. Tap and drag the on the color bar to select a color. The selected icon and color display above the color bar. 7. Tap Back to save changes.
Set Warnings For more on warning options, see “Warning Options” on page 117. Warnings Window Note: Only available in Truck mode. See “Select Truck or Car Mode” on page 21. From the Main Menu: 1. Tap Truck Tools > Warnings. 2. Tap and to view the options. 3. Tap the warning to be set. Note: Tap (decrease) and number of miles or hours. (increase) to specify the 4. Tap Back to save changes. Note: To turn warnings off completely, tap the displays.
Destinations Ways to Search for Locations Find Addresses To find an address, you can: • “Search for an Address” on page 31. • “Search Near a City Center” on page 32. • “Search For an Intersection” on page 33. • “Search by ZIP Code for an Address” on page 34 • “Search by ZIP Code for an Intersection” on page 35 • “Search by Latitude/Longitude” on page 36 Find Nearby Points of Interest (POIs) You can find points of interest (POIs) by: • “Select a Quick Stop POI” on page 40.
Location Searches Destination Selection Window Truck Mode To access this window from the Main Menu, tap Choose Destination. 1 1 Back Tap to return to the Main Menu. 2 3 2 New Location Tap to find a new address. 4 3 History Tap to view a list of previous locations. 5 4 6 Address Book Tap to view a list of saved locations. 5 Multi-Stop Trips Tap to view a list of saved multi-stop routes or to create a new one.
Destination Search Auto-Complete Feature Enter the first few characters in a name and a short list displays a couple of names that start with the typed characters. On the keyboard, the only keys available are for the next valid characters in a search name. Continue entering characters until the searched for name displays in the list. Tap on the name to select it. Other buttons on this window include: Tap to search for a location by ZIP code. Tap to return to the previous window.
About City Street Names Some cities with common names such as “Concord” have several types of names associated with a city. If a name does not display, continue typing characters until the name you are looking for displays in the list. Expand Search for Street Names The Expand Search button on the street name selection window can help locate addresses that may actually be in a different town, spelled slightly differently, or in a neighboring town.
First Use Select a City First Use On first use, the Select City Name Window displays. On the keyboard, type the first few characters in the city name. Short City List On the next use, the city name selected in the previous search displays. Tap on the city name to search for a location in the city. To find locations in a different city, type the first few characters in the new city name. Short City List As you type the characters in the city name, a short list of matching city names displays.
Find Addresses Location Selection Window 1 2 3 1 Address Tap to search for an address by entering the city, street, and number. 4 5 2 City Center Tap to search for an address in a city. 3 Intersection Tap to search for an address by entering the city and two intersecting roads. 6 4 Back Tap to return to the Destination Selection Window. 5 Enter Lat/Long Tap to search for a location by latitude and longitude. 6 Menu Tap to return to the Main Menu.
Search for an Address From the Main Menu: Select City List 1. Tap Choose Destination > New Location > Address. 2. Type the first few characters in the city name. The Select From City List displays. 3. Tap on the city/state from the displayed list. 4. Type the first few characters in the street name, or if the next characters of the street name can not be selected on the keyboard, tap Expand Search and search a wider area. The Select Street List displays. 5. Tap on the street name from the displayed list.
Search Near a City Center From the Main Menu: 1. Tap Choose Destination > New Location > City Center. Select From the List 2. Type the first few characters in the city name. The Select From the List window displays. 3. Tap on the city/state name. The Confirmation Window displays. 4. Tap Begin New Route to navigate to the location. See “Address Confirmation Window” on page 72 for more options. 5.
Search For an Intersection From the Main Menu: Select From The List Window 1. Tap Choose Destination > New Location > Intersection. 2. Type the first few characters in the city name. The Select From the List Window displays. 3. Tap on the city name. The Enter Primary Street Window displays. 4. Type the first few characters in the primary street name, or if the next characters of the street name can not be selected on the keyboard, tap Expand Search and search a wider area. Enter Primary Street Window 5.
Search by ZIP Code for an Address Enter City Name Window Note: For Canada, only three digit postal codes are supported. From the Main Menu: 1. Tap Choose Destination > New Location > Address. 2. Tap ZIP Code Search. 3. The Enter ZIP Code Window displays. 4. Type the ZIP code. The Enter Street Name window displays. Enter Zip Code Window 5.
Search by ZIP Code for an Intersection Enter Zip Code Window From the Main Menu: 1. Tap Choose Destination > New Location > Address. 2. Tap Zip Code Search. The Enter ZIP Code Window displays. 3. Type the ZIP code. The Enter Primary Street Name window displays. Enter Primary Street Name Window 4. Type the first few characters in the street name or if the next characters of the street name can not be selected on the keyboard, tap Expand Search and search a wider area.
Search by Latitude/Longitude Enter Geographic Coordinate Window From the Main Menu: 1. Tap Choose Destination > New Location > Enter Lat/Long. The Enter Geographic Coordinate Window displays. 2. Tap in the Latitude field. The Enter Latitude Window displays. 3. Enter the latitude of the location and tap Enter. The Enter Geographic Coordinate Window redisplays. 4. Tap in the Longitude field. The Enter Longitude Window displays. Enter Latitude Window 5. Enter the longitude of the location and tap Enter.
Point of Interest Windows Points of Interest Selection Window POI Selection Window - Truck Mode 2 1 Different buttons display on the POI Selection Window, depending on whether the device is set to Truck or Car mode. See “Select Truck or Car Mode” on page 21 for more information. 4 3 7 6 5 8 9 1 My Truck/Near Car Tap to search for a point of interest near the current Vehicle location. 2 City Tap to search for a point of interest in a city.
Points of Interest (POI) Category Window 1 POI Category Window Tap to search for a travel center with truck amenities. 2 1 Travel Center Tap to search for a truck services POI 3 2 Truck Services 3 Parking & Rest Area Tap to search for truck parking or a rest stop. 4 5 6 7 4 Weigh Station Tap to search for a truck weigh station. 5 8 9 10 11 Scale Tap to search for a CAT scale location. 6 Truck Dealer Tap to search for a truck dealership.
Points of Interest (POIs) Searches The IntelliRoute® TND™ offers thousands of Points of Interest. Truck-related POIs include Truckers Friend and Rand McNally locations that offer many amenities to address trucking professional needs. --------------------Truck-Related POIs---------------- Truck-Related POIs See “Select a Truck Related Point of Interest” on page 42. • Travel Center Amenities include: Fueling stations, Food stores, Restaurants, Showers, etc.
Select a Quick Stop POI Select Quick Stop Window From the Main Menu: 1. Tap Choose Destination > Points of Interest. 2. Tap Quick Stops. The Select Quick Stop Window displays. 3. Tap on a POI type. The Quick Stop List displays. 4. Tap on a location from the list. Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Select a Custom POI Location See “Custom POI Locations” on page 119 for more information. Find a POI Window .From the Main Menu: 1. Tap Choose Destination > Points of Interest. 2. Tap Custom POI. The My POI Window displays. 3. Tap on a location from the list. Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Select a Truck Related Point of Interest 1. Tap Choose Destination > Points of Interest. POI Category Window 2. Select a search type (My Truck/My Car, City, My Route, End of Day, or Destination). On the POI Category Window: 3. Tap: • Travel Center (See “Select and Filer Travel Center Amenities” on page 43), or • Truck Service (See “Select and Filter Truck Services” on page 44), or • Parking & Rest Area, or • Weigh Station, or • CAT Scale, or • Truck Dealer. 4.
Select and Filer Travel Center Amenities POI Category Window Truck-related Travel Center points of interest can include over 70 different types of amenities. To select only amenities that you are interested in, filter your search results. 1. Tap Choose Destination > Points of Interest. 2. Select a search type (My Truck/My Car, City, My Route, End of Day, or Destination). On the POI Category Window: 3. Tap Travel Center. The Travel Center Window displays all travel centers in your area.
POI Category Window Select and Filter Truck Services Truck Service points of interest include many different types of services. To select only services that you are interested in, filter your search results. 1. Tap Choose Destination > Points of Interest. 2. Select a search type (My Truck/My Car, City, My Route, End of Day, or Destination). On the POI Category Window: 3. Tap Truck Service. The Truck Service Window displays all service locations in your area. Select Truck Service Window 4.
Select a Consumer Point of Interest By Category 1. Tap Choose Destination > Points of Interest. POI Category Window 2. Select a search type (My Truck/My Car, City, My Route, End of Day, or Destination). On the POI Category Window: 3. Tap More. The Select Category Window displays. 4. Tap on a category. (For example, tap Hospital/Emergency.) 5. If necessary, tap on a subcategory type. (For example, tap Pharmacy.) The Select Point of Interest Window displays POI locations. Select Category Window 6.
Select a Consumer Point of Interest by Name Select Category Window Note: The spell function is only available for searches near My Truck/My Car or City. 1. Tap Choose Destination > Points of Interest. 2. Select a search type (My Truck/My Car or City). On the POI Category Window: 3. Tap More. The Select Category Window displays. 4. Tap All. The Select Point of Interest Window displays. 5. Tap on the Spell button to display the keyboard. Select Point of Interest Window 6.
Search for Nearby Points of Interest (POIs) POI Category Window Near the Current Vehicle Location From the Main Menu: 1. Tap Choose Destination > Points of Interest > My Truck. The POI Category Window displays. 2. Tap: • Travel Center and filter for amenities. (See page 43.) • Truck Service and filter for services. (See page 44.) • Parking & Rest Area, Weigh Station, CAT Scale, or Truck Dealer. • More and select a Consumer POI. See page 45 and page 46. Note: If no locations are found, a message displays.
In a City From the Main Menu: Select Address List 1. Tap Choose Destination > Points of Interest > City. 2. Type the first few characters in the city name. The Select Address List displays. 3. Tap on the city/state from the displayed list. The POI Category Window displays. 4. Tap: • Travel Center and filter for amenities. (See page 43.) • Truck Service and filter for services. (See page 44.) • Parking & Rest Area, Weigh Station, CAT Scale, or Truck Dealer.
Along the Route POI Category Window From the Main Menu: 1. Tap Choose Destination > Points of Interest > My Route. The POI Category Window displays. 2. Tap: • Travel Center and filter for amenities. (See page 43.) • Truck Service and filter for services. (See page 44.) • Parking & Rest Area, Weigh Station, CAT Scale, or Truck Dealer. • More and select a Consumer POI. See page 45 and page 46. The Select Window displays POI locations.
Near End of Day Location POI Category Window Note: This feature uses your remaining hours of service and average speed to estimate your end of day location. The device then searches for the selected POI category around the estimated location. To use this feature, driver timers must be properly used. See “Timers and Logs” on page 96. 1. Create a route or load a trip. From the Main Menu: 2. Tap Choose Destination > Points of Interest > End of Day. The POI Category Window displays. 3.
Select a Custom POI Location Nearby See “Custom POI Locations” on page 119 for more information. 1. Tap Choose Destination > Points of Interest. POI Category Window 2. Select a search type (My Truck/My Car, City, My Route, End of Day, or Destination). On the POI Category Window: 3. Tap Custom POI. The My POIs Window displays. 4. Tap on a location from the list Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Find a Location by Tapping on the Map Tap on the Map and Avoid the Location Map Window From the Main Menu: 1. Tap on Go to Map to display the map. 2. Use the (zoom in) and segment on the map (zoom out) buttons to display the road 3. Tap on the road segment you want to avoid. The crosshairs display at the tapped location. 4. Tap Avoid. The button label changes to Remove Avoid. Note: When Avoid is selected, the location is permanently blocked.
Tap on the Map and Route to the Location 1. Tap on Go to Map to display the map. Map Window 2. Use the the map (zoom in) and (zoom out) buttons to display the location on 3. Tap on the location you want to route to. The crosshairs display at the tapped location. 4. Tap Route to Here. 5. Tap Back to save changes. The Confirmation Window displays. Tap on Map Location Window 6. Tap Begin New Route to navigate to the location. See “Address Confirmation Window” on page 72 for more options. 7.
Rate a Truck-Related Point of Interest Confirmation Window 1. Search for and select a truck-related point of interest. (See “Select a Truck Related Point of Interest” on page 42. The Confirmation Window displays. On the POI Rating button, the top row indicates the community rating from fellow drivers for the point of interest. The bottom row indicates your individual rating. 2. Tap on the POI Ratings button. The POI Ratings Window displays the Personal Rating tab. 3. Use and to rate the facility. 4.
Manage Destinations Set Your Current Location as Home Using GPS Note: Only available in Car mode. From the Main Menu: 1. Tap Choose Destination > Set as Home. The current location is saved in your Address Book as “Home”. The button changes to Take Me Home. 2. Tap the Take Me Home button to calculate a route from your current location to your home location. To reset to a new Home, simply delete the Home entry from your Address Book. Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Search for a Location and Set as Home Confirmation Window Note: Only available in Car mode. Any location can be set as Home. To manually set a location other than where you are, make sure you are indoors and have no GPS reception. From the Main Menu: 1. Search for and select a location. 2. On the Confirmation window, tap Set Origin. 3. Tap Choose Destination > Set as Home. The selected location is saved in your Address Book as “Home”. The button changes to Take Me Home. 4.
Address Book Confirmation Window Save a Location in the Address Book 1. Search for a Destination. On the Confirmation Window: 2. Tap Save to Address Book. The Default Name Confirmation Window displays. 3. Tap Yes to accept the default name or tap No to display a keyboard. 4. Type a the name of the location and tap Enter to save the location in the Address Book. The Confirmation Window redisplays 5. Tap Close to redisplay the Confirmation Window. . Enter Name Window 6.
Sort Address Book Entries by Name or Distance Address Book Window - Sorted by Name From the Main Menu: 1. Tap Choose Destination> Address Book. The Address Book Window displays. The All Addresses tab is shown. Entries are alphabetically sorted by name. 2. To sort by distance, tap The Sort By Window displays. . 3. Tap Sort by Distance. Addresses are sorted by distance. The button is labeled Sort by Distance. 4. When finished: Sort By Window • Tap Back to return to the Destination Selection Window.
Select a Location from the Address Book From the Main Menu: Address List 1. Tap Choose Destination > Address Book. 2. Tap on the All Addresses tab. The Address List displays. 3. Tap on an address to select it. The Confirmation Window displays. 4. Tap Begin New Route to navigate to the location. See “Address Confirmation Window” on page 72 for more options. 5. If the vehicle mode is set to Truck and the Load Option is set to Prompt, a Confirmation Window asked if the Truck is empty or loaded. 6.
Create an Address Book Group You must create the group before you can add addresses to it. Address Book Group Tab From the Main Menu: 1. Tap Choose Destination > Address Book. The Address Book Window displays. 2. Tap on the Groups tab. 3. Tap New Group. The Enter Name Window displays. 4. Type the group name. 5. To select a different color folder, tap . The Choose Folder Color Window displays. Enter Name Window 6. Tap on a color, then tap Close. 7. When finished, tap Enter. The Groups tab redisplays.
Add an Address to a Group From the Main Menu: Address Book Group List 1. Tap Choose Destination > Address Book: 2. Tap the Groups tab. 3. Tap on the Group you want to add an address to. 4. Tap New Location. The Add Destination Window displays. 5. Tap: • Enter New Address and search for an address. (See page 31.) • History and select a History List location. (See page 52.) Add Destination Window • Saved and select an Address Book location. (See page 49.) • POI and select a point of interest. (See page 34.
Remove an Address From a Group From the Main Menu: Group Address List 1. Tap Choose Destination > Address Book. 1. Tap on the Group tab. 2. Tap on the Group you want to remove the address from. 3. Tap on the next to the address to be removed. A confirmation window displays. 4. Tap Yes. The Address Book Group redisplays with the address removed. Confirmation Window Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Select a Location From a Group From the Main Menu: Groups List 1. Tap Choose Destination > Address Book. 2. Tap on the Groups tab. The Groups List displays. 3. Tap on the Group that contains the location. The Group Address List displays. 4. Tap on the location. The Confirmation Window displays. Group Address List 5. Tap Begin New Route to navigate to the location. See “Address Confirmation Window” on page 72 for more options. 6.
History List Destination History List Select a Location from the History List From the Main Menu: 1. Tap Choose Destination > History. The Destination History List displays. 2. Tap on the destination to select it. The Confirmation Window displays. 3. Tap Begin New Route to navigate to the location. See “Address Confirmation Window” on page 72 for more options. 4. If the vehicle mode is set to Truck and the Load Option is set to Prompt, a Confirmation Window asked if the Truck is empty or loaded. 5.
Multi-Stop Routes Multi-Stop Trips Window Create a Multi-Stop Route From the Main Menu: 1. Tap Choose Destination > Multi-Stop Trips. The Multi-Stop Trips Window displays. 2. Tap New Trip. The Enter Name Window displays. 3. Type the trip name. 4. To select a different color folder, tap . The Choose Folder Color Window displays. Enter Name Window 5. Tap on a color, then tap Close. 6. When finished, tap Enter. The Multi-Stop Trips Window redisplays. The new trip name is shown.
Add Locations to a Multi-Stop Route Note: Add locations in the order you want to route to them. Route Stop Window From the Main Menu: 1. Tap Choose Destination > Multi-Stop Trips. The Multi-Stop Trips Window displays. 2. Tap on the route. The Route Stop Window displays. 3. Tap Add Address. The Add Destination Window displays. 4. To add an address, tap: Add Destination Window • Enter New Address and search for an address. (See page 31.) • History and select a History List location. (See page 52.
Remove a Stop from a Route Route Stop List From the Main Menu: 1. Tap Choose Destination > Multi-Stop Trips. The Multi-Stop Trips Window displays. 2. Tap on the route. The Route Stop List displays. 3. Tap on the next to the stop to be removed. A confirmation window displays. 4. Tap Yes. The Route Stop List redisplays with the stop removed. Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Select and Run a Saved Route From the Main Menu: Multi-Stop Route List 1. Tap Choose Destination > Multi-Stop Trips. The Multi-Stop Route List displays. 2. Tap on the route to select it. The Route Stop Window displays. 3. Tap Start Trip. The Confirmation Window displays. 4. Tap Begin New Route to navigate to the location. See “Address Confirmation Window” on page 72 for more options. 5.
Delete a Route From the Main Menu: Multi-Stop Route List 1. Tap Choose Destination > Multi-Stop Trips. The Multi-Stop Trips Window displays. 2. Tap on the next to the route to be deleted. 3. A confirmation message displays. 4. Tap: • Yes to delete the route. • No to keep the route. 5. The Multi-Stop Trips Window redisplays. If you tapped Yes, the selected route has been removed. Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Optimize Routes Select Reorder Option Window Optimize a Route Manually 1. Tap Choose Destination > Multi-Stop Trips. The Multi-Stop Trips Window displays. 2. Tap on the route you want to optimize. The Route Stop Window displays. 3. Tap Reorder Trip. The Select Reorder Option Window displays. 4. Tap Manual. The Reordering Window displays 5. Tap on the stop to be moved and tap: Reordering Window To move the stop up in the route. To move the stop down in the route. 6.
Optimize a Route Automatically Select Reorder Option Window After all locations have been added to a multi stop route, you can run the optimizer wizard to organize your trip. From the Main Menu: 1. Tap Choose Destination > Multi-Stop Trips. The Multi-Stop Trips Window displays. 2. Tap on the route you want to optimize. The Route Stop Window displays. 3. Tap Reorder Trip. The Select Reorder Option Window displays. 4. Tap Automatic/Optimize. The First Stop Window displays. Reordered Route Stop Window 5.
Destination Confirmation Windows Address Confirmation Window Address Confirmation Window 1 Destination Address The selected location address. 1 2 2 Begin New Route Tap to begin routing to destination. 3 3 Add as Via Add this location as an interim stop between the origin and destination. 5 6 4 4 Save to Address Book Add the location to the Address Book. 7 8 9 5 Atlas View Rand McNally Motor Carriers’ Road Atlas. “P” refers to the Road Atlas page number.
Consumer Point of Interest Confirmation Window 1 Consumer Point of Interest Confirmation Window 1 Destination Address The selected location address. 2 2 Begin New Route Tap to begin routing to destination. 3 5 6 4 3 Add this location as an interim stop between the origin and destination. 4 Save to Address Book Add the location to the Address Book. See “Address Book” on page 57. 5 7 Add as Via 9 Atlas Cross-reference to printed Rand McNally Motor Carriers’ Road Atlas.
Truck-Related Point of Interest Confirmation Window 1 Truck-Related Point of Interest (POI) Confirmation Window 2 1 Destination Address The selected location address. 2 Begin New Route Tap to begin routing to destination. 4 3 8 7 3 Tap to view trucker amenities at this location. 5 6 4 10 POI Rating Tap to rate amenities at this location. 5 9 Services Add as Via Add this location as an interim stop between the origin and destination.
Address Book Confirmation Window 1 Address Book Confirmation Window Destination Address The selected location address. 2 1 2 Begin New Route Tap to begin routing to destination. 3 4 3 Edit Entry Tap to edit the location address book entry. 6 8 4 7 5 Tap to create a note about the location. 5 9 Note 10 Add as Via Add this location as an interim stop between the origin and destination. 6 Atlas Cross-reference to printed Rand McNally Motor Carriers’ Road Atlas.
Maps Route Map Window 1 Next Maneuver Tap to repeat spoken next maneuver instructions Route Map Window 2 1 3 2 Road Name The name of street you will turn onto next. 3 4 Miles/Time Tap to select current time and remaining distance. 4 5 Tap to select a route display option. Options include Detail view (turnby-turn instructions), Highway View (highways list), Trip Summary (route legs), or Summary Map View (complete route map).
11 Map Display Tap to change the map display. An icon in the upper right button corner displays the selected option: North up (N), heading up (arrow), or 3D (3). 12 Main Menu Tap to return to Main Menu. Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Slide-Out List Detail View 1 Route Option - Detail View Altitude Displays the altitude of current vehicle location. 1 2 3 4 2 MPH Displays the current vehicle speed, in miles per hour. 5 6 3 Rise/Set Displays the times of sunrise and sunset for your current location. 4 Odom1, Odom 2 Displays odometer readings. 5 7 Distance Displays the distance to the next maneuver and the type maneuver performed.
Highway View 1 Altitude Displays the altitude of current vehicle location. Route Option - Highway View) 2 1 2 3 MPH Displays the current vehicle speed, in miles per hour. 4 3 Rise/Set Displays the times of sunrise and sunset for your current location. 5 6 4 Odom1, Odom 2 Displays odometer readings. 5 Distance Displays distance to next road. 7 8 6 Street/Road Name Displays the name of the next road. 7 Route Display Options Tap to select another route display option.
Route Summary 1 Total Distance Total distance for the entire trip. Route Option - Route Summary 2 Total Time Total time to complete the entire trip. 1 2 3 Leg Number of the leg and distance. 3 4 4 Leg Destination Leg destination. 5 Route Display Options Tap to select another route display option. 5 6 Rand McNally IntelliRoute® TNDTM 710 User’s Guide 8 Up/Down Tap to scroll up and down to view the list of maneuvers. Tap on any item in the list to view it on the map. Version 2.0.
Summary Map View 1 Route Option - Summary Map View 2 Back Tap to return to the Route Map Window. 3 2 Total Dist Total distance for the entire trip. 1 3 Total Time Total time to complete the entire trip. 4 4 Vehicle Location Current vehicle location on the route. Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Select a Route Display Option When first opened, the slide out list displays in Detail View. Route Option - Detail View While navigating a route: 1. Tap to display slide out list. The Slide Out List displays Detail View. 2. To change the route option, tap 3. On the Route Display Mode, tap on a view. 4. The map displays the selected view. 5. Use and to view the instructions. 6. To hide the slide out list, tap .
Current Road Information On the Route Map Window, the Road Information field lets you view information on the road you are currently on. Road Info Field Information includes: City, county, and state Current road name Next intersecting street name View Current Road Information 1. Create a route or load a trip. On the Route Map Window The city, county and state display in the Road Information field. 2. Tap on the Road Information field. Current road information displays. 3.
Junction View Route Map Window 1 2 3 When on a route, Junction View displays when you have an upcoming maneuver. Once past the maneuver, Junction View closes and the previous window displays. Once you’ve driven past the junction, the previous window redisplays. 1 Current Highway The highway you are currently on. 2 Next Highway 4 The highway you will be on after the next maneuver. 5 3 Lanes Number and direction of lanes for the next maneuver. 4 Miles Number of miles to the upcoming maneuver.
Virtual Dashboard Virtual Dashboard 8 2 9 1 When using the virtual dashboard on a route, the virtual dashboard closes and the Junction View displays an upcoming maneuver. Once past the maneuver, the virtual dashboard redisplays. 1 3 4 5 Current direction of travel. 2 Times Local times at the yard, current location, and your destination. 3 Sunrise/Sunset 6 7 Direction 10 Sunrise/Sunset time based on vehicle location (latitude/longitude) and day.
Show/Hide the Virtual Dashboard Virtual Dashboard - Show/Hide 1. Create a route or load a trip. On the Route Map Window: 2. To show, tap the Current Speed field. The Virtual Dashboard displays. 3. To hide, tap the Back button to return to the Route Map Window. Tap here Gather Trip Information Virtual Dashboard - Trip information 1. Create a route or load a trip. On the Route Map Window: 2. Tap the Current Speed field. The Virtual Dashboard displays. 3. Tap on a tab (Tab 1, Tab 2, or Tab 3). 4.
Virtual Dashboard - Show/Hide Automatically Reset Trip Information On the Route Map Window: 1. Tap the Current Speed field. The Virtual Dashboard displays. Tap here 2. Tap on the tab you want to reset automatically. 3. Tap Auto Reset. The Auto Reset window displays. Virtual Dashboard - Auto Reset Off 4. To reset trip information after the vehicle has remained stationary after a specific number of hours: • Tap to increase the number of hours. • Tap to decrease the number of hours.
Detours Route Map Window Detour Around Part of the Route Use this procedure to recalculate a route to avoid the next several miles on the route. Note: To detour around a specific roadway, see “Detour Around a Specific Roadway” on page 89. While navigating a route: 1. Tap . The Location Route Options Window displays. Location Route Options Window 2. Tap Detour. The Detour Window displays. 3. On the left side of the window, tap the number of miles on the route to be avoided.
Detour Around a Specific Roadway Use this procedure to recalculate a route to avoid, if possible, a specific roadway. Route Map Window While navigating a route: 1. Tap . The Location Route Options Window displays. 2. Tap Detour. The Detour Window displays. 3. On the right side of the window, tap the current route. and to view a list of roads in 4. Tap on one or more roadways to be avoided. A yellow checkmark appears in front of each selected road. Location Route Options Window 5.
Detour Using the Detail View Map Display Option Detail View Detour Options While navigation a route: 1. Tap to display slide out list. 2. Tap on the maneuver you want to avoid. 3. Tap Detour. A new route is calculated avoiding (if possible) the selected maneuver. The Turn-by-Turn list redisplays, showing the new route. Highway View Detour Options Detour Using the Highway View Map Display Option While navigation a route: 1. Tap to display slide out list. 2. Tap on the highway you want to avoid. 3.
Cancel a Route While navigating a route: Route Map Window 1. Tap . The Location Route Options Window displays. 2. Tap Cancel Route. The route is cancelled and the Route Map Window displays your current location. Location Route Options Window Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Traffic Traffic Window Traffic Window 2 2 3 1 Avoid Traffic Tap to select either a recalculated route based on traffic events or to stay on the current route. 2 Traffic on Route Tap to view traffic events along your route.. 3 4 5 Traffic List Tap to view a list of traffic events within receiver range. 6 4 Back Tap to return to the Route Map Window. 5 Off/Predicted Traffic/Real-Time Traffic Tap to select Predicted Traffic, Real-Time Traffic or to turn traffic reporting off.
Predicted Traffic Traffic Window With predicted traffic, you can view traffic patterns on a route. You can select the day of the week and time and view traffic events. You can use this to view traffic patterns for a specific roadway for a day and time. View Predicted Traffic Information On the Traffic Window: 1. Tap the Off/Predicted/Real-Time Traffic button to display “Predicted Traffic”. The Predicted Traffic window displays. 2.
View Real-Time Traffic Note: Real-time traffic is available as an optional service. Sample Real-Time Traffic Window With the Real-Time Traffic service you’ll receive notification of traffic conditions and events. You can choose to ignore the warning or to recalculate a route avoiding the problem. To use this feature, you must purchase a Rand McNally Real-Time Traffic Receiver. The receiver also comes with a lifetime traffic subscription.
Truck Tools Truck Tools Window Note: Truck Tools are only available in Truck mode. See “Select Truck or Car Mode” on page 21. 1 2 3 1 Back Return to the Main Menu. 4 8 5 9 6 7 10 11 2 Truck Info Enter truck information (weight, length, etc.). 3 Timers and Logs View driving, on-duty, and maintenance timers or state logs. 4 Warnings Set warning distances for driving time, duty hours, and weigh stations. 5 Quick Planner Calculate distance, driving time, and cost between two major cities.
Timers and Logs Timers Window Note: Odometers count up and record the current mileage. Maintenance counters count down. When a maintenance timer counts down to 2,000 miles, a reminder displays each time the TND starts. Note: To avoid timer warnings, set the timer limits to a very high number. View Timers and Odometer Readings From the Main Menu: 1. Tap Truck Tools > Timers and Logs. 2. Tap the Timers tab. The Timers Window displays. 3. Tap to Back return to the Truck Tools window.
Change or Reset a Timer From the Main Menu: Timers Window 1. Tap Truck Tools > Timers and Logs. 2. Tap the Timers tab. The Timers Window displays. 3. Tap on the timer to be reset. The Timer Reset Window displays. On the left, use the Change To field to make corrections to mileage or hours. The mileage/hours continue to count down from the changed value. This would be used occasionally if you need to make an adjustment to the current value.
View Driver Logs From the Main Menu: Logs Window 1. Tap Truck Tools > Timers and Logs. The Timers Window displays. 2. Tap the Logs tab. The Logs Window displays. A list of logs for the current year, ordered by quarter displays. 3. To view quarterly logs for previous years, tap Year. 4. Tap on a quarter to view log entries. The Log Entries Window displays. 5. To view log entries by: Log Entries Window - by Date • State, tap View by State. • Date, tap View by Date. 6.
Delete a Driver Log From the Main Menu: Logs Window 1. Tap Truck Tools > Timers and Logs The Timers Window displays. 2. Tap the Logs tab. The Logs Window displays. 3. A list of logs for the current year displays, ordered by quarter. 4. To view quarterly logs for previous years, tap Year. 5. Tap on a quarter to view log entries. The Log Entries Window displays. 6. To view log entries: • By state, tap View by State. Log Entries Window • By date, tap View by Date. 7.
Set Warnings From the Main Menu: Warnings Window 1. Tap Truck Tools > Warnings. The Warnings Window displays 2. Tap and to view the options. 3. Tap the warning to be set. 4. Tap and to specify the number of miles or hours. 5. Tap Back to save changes. Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Calculate a Mileage and Driving Time Quick Planner Window Note: This tool is not available for all locations. Use this tool to quickly estimate the mileage and time between one major city to another major city in North America. From the Main Menu: 1. Tap Truck Tools > QuickPlanner. The Quick Planner Window displays. The revenue or cost per mile used in the last computation displays. 2. Tap From City 1 and select the city. 3. Tap To City 2 and select the city. Enter Amount Window 4.
View Rand MCRA Atlas Information From the Main Menu: Rand MCRA Window 1. Tap Truck Tools > Motor Carrier’s Road Info. The Rand MCRA Window displays. 2. Select the appropriate country tab. The State List (USA.), Province List (Canada) or Mexico displays. 3. Tap on the appropriate U.S. state or Canadian province. Tap Mexico to see emergency information in Mexico. The Atlas Information Window for the selected location displays. 4.
Send a Message to Rand McNally Tell Rand McNally About Window You can send a message to Rand McNally about updates such as road construction, updates to truck-restricted road information, etc. To use this feature, you must install the TND Dock application on your computer. See “Install TND Dock Software” on page 125. Send a Message About Your Current Location From the Main Menu: 1. Tap Truck Tools > Tell Rand. The Tell Rand McNally About Window displays. 2.
Send a Message About a Different Location From the Main Menu: Tell Rand McNally About Window 1. Tap Truck Tools > Tell Rand. The Tell Rand McNally About Window displays. 2. On the left side of the window, tap Enter Different Location. The Select Address Window displays. 3. Search for and select the location. The selected location appears below the buttons on the Tell Rand McNally About Window. 4. On the right side of the window, tap the type of message you want to send. The Enter Message Window displays.
Send a Message About a Location on the Map From the Main Menu: Tell Rand McNally About Window 1. Tap Truck Tools > Tell Rand. The Tell Rand McNally About Window displays. 2. On the left side of the window, tap Find Location on Map. The Map Window displays. 3. Move the cursor to the location and tap Back. The selected location appears below the buttons on the Tell Rand McNally About Window. 4. On the right side of the window, tap the type of message you want to send. The Enter Message Window displays. 5.
Use the Unit Converter From the Main Menu: Converter Window 1. Tap Truck Tools > Converter. The Converter Window displays 2. Tap on the first field and select the type of conversion to perform. The Converter Window redisplays. 3. Tap on the second field and enter the value to be converted. 4. Tap Enter. The Converter Window redisplays and displays the converted value. Conversion Types Window Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Use the Calculator Calculator From the Main Menu: 1. Tap Truck Tools > Calculator. 2. Tap: • Back to return to the Truck Tools Window. • Menu to return to the Main Menu. Calendar Use the Calendar From the Main Menu: 1. Tap Truck Tools > Calendar. The Calendar displays. 2. When finished tap Back. Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Use the NotePad Notes Window Create a Note From the Main Menu: 1. Tap Truck Tools > NotePad. The Notes Window displays. 2. Tap New Note and type the new note. 3. When finished, tap Enter to save the note. Edit an Existing Note From the Main Menu: 1. Tap Truck Tools > NotePad. The Notes Window displays. 2. Tap on an existing note and make the necessary edits. 3. When finished, tap Enter to save the changes Delete a Note From the Main Menu: 1. Tap Truck Tools > NotePad. The Notes Window displays. 2.
Customize Truck Information Note: Only available in Truck mode. See “Select Truck or Car Mode” on page 21. Truck Information Window To change these settings, from the Main Menu: • Tap Truck Tools > Truck Info. Hazmat Type Specify the load hazardous material type. Options are: None (not hazardous materials), Explosives, Gas, Flammable Liquids, Flammable Solids, Oxidizers, Poison, Radioactive, Corrosives, Other, and PIH. Weight Use and to specify the truck weight.
Vehicle Options (Truck or Car) Note: If the mode is currently set to Car, the tab is labeled Car Mode. Vehicle Options Window (Truck) To change these settings, from the Main Menu: • Tap Preferences > Truck tab. Vehicle Type Select the vehicle mode. Options are: Truck or Car. This option controls how routes are calculated. When the Car mode is selected, some truck-related features are not available. See “Select Truck or Car Mode” on page 21. Yard Time Zone Select the yard time zone.
Toll Booth Alert Specify when (in miles) to issue a warning when approaching a toll booth. Update Driver Status Specify if the driver status will be changed automatically or can only be changed using the driver status buttons on the Main Menu. Note: When in Automatic mode, tapping a driver status button on the Main Menu will temporarily override the automatic setting.
Route Options Routing Options Window Note: When a roadway (tollways, ferries, or freeways) or maneuver type (U-turns) is set to Avoid, a returned route may still include them. They’re included if the only legal route found contains these types of roads or the route is over several hundred miles. To change these settings, from the Main Menu: • Tap Preferences >Route tab. Rand McNally IntelliRoute® TNDTM 710 User’s Guide ETA Adjustment Specify how arrival time should be estimated.
Cross Country Borders Select whether roads crossing a country border are considered in a calculated route. Options are: Allow Crossing Country Borders or Avoid Crossing Country Borders. When set to Avoid, a route may still cross country borders if the only legal route contains roads that cross borders or if the route origin and destination are in different countries. Rand McNally IntelliRoute® TNDTM 710 User’s Guide Dirt Roads Select whether dirt roads are considered in a calculated route.
Device Options Device Settings Window To change these settings, from the Main Menu: • Tap Preferences > Device tab. Adjust Screen Night Mode Darkness Set the brightness level for night time screen display. Tap and drag the to brighten or darken the screen display. Day/Night Map Color Select the default display mode for the device.
Auto Dismiss Warnings Select when (in seconds) a warning message is automatically dismissed. Options are Never, After 10 Seconds, or After 30 Seconds. Note: Warnings for height, weight and hazmat violations are not dismissed. Units Select how vehicle weight is displayed. Options are U.S. Standard or Metric. Clock Setting Select whether a 12 hour clock (with am and pm) or a 24 hour clock is set on the device.
Real Time Traffic Settings Note: Real-Time traffic requires the purchase of an additional accessory. Set to show real time traffic events related to flow only, incidents only, or both flow and incidents. Real time traffic can also be turned off. Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Warning Options To change these settings, from the Main Menu: Warnings Window • Tap Truck Tools > Warnings. Note: Only available in Truck mode. See “Select Truck or Car Mode” on page 21. Note: Also see the Warning option in “Vehicle Options (Truck or Car)” on page 110 for information on setting how warnings will be issued (visual, audio, visual and audio, etc.) Hills & Sharp Curves Specify when (in miles) to issue a warning before reaching a hill or sharp curve.
Toll Booth Alert Specify when (in miles) to issue a warning about an upcoming tollbooth. Weigh Station Specify when (in miles) to issue a warning about an upcoming weigh station. Construction Area Specify when (in miles) to issue a warning about upcoming road construction. Speed Limit Change Specify when (in miles) to issue a warning about a speed limit decreases. Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Custom POI Locations Note: This is an advanced feature for knowledgeable computer users. Please read the directions carefully. You can create your own custom POI locations on your PC and send them to your TND. Then you can select them on your IntelliRoute TND. Custom POI Information You can enter custom POI locations in one of three ways. A custom POI file can contain all three methods of location entry.
Sample Custom POI Location File Using Commas and Spaces When entering custom POI location information, each piece of information (like latitude, longitude or name) is separated by a comma. When entering location information, no space is allowed before or after the comma. Do not add a comma after the last field in a row. For example, when entering a latitude, longitude, and name: Correct: -117.3-905,34.
Create a Custom POI Location File Use the following steps to create a custom POI location file. 1. Create a .txt or .csv file. (Use a standard text editor or spreadsheet program). 2. Name the file. 3. Save the file. The file contains one line for each location. See: • “Add a Custom POI Location Method 1 (Latitude/Longitude)” on page 121. • “Add a Custom POI Location Method 2 (Street Address)” on page 122. • “Add a Custom POI Location Method 3 (Full Information)” on page 123.
Add a Custom POI Location Method 2 (Street Address) 1. Type two commas (,,). 2. Enter the name (with spaces) followed by a comma. 3. Provide the phone number. • Enter the phone number followed by a comma (,). • If you don’t know the phone number, enter a comma (,). 4. Enter the street address followed by a comma (,). 5. Enter the city followed by a comma (,). 6. Spell the state name out (such as Illinois) followed by a comma (,). 7. Enter the country name followed by a comma, (,).
Add a Custom POI Location Method 3 (Full Information) Note: Enter longitude first. 1. Enter the longitude followed by a comma(,) 2. Enter the latitude first followed by a comma (,) 3. Enter the name (with spaces) followed by a comma. 4. Provide the phone number. • Enter the phone number followed by a comma (,). • If you don’t know the phone number, enter a comma (,). 5. Enter the street address followed by a comma (,). 6. Enter the city followed by a comma (,). 7.
Update the Custom POI Location File Custom POI locations can be added or changed at any time. When you update and transfer the file, the new file overwrites the existing file. On your PC: 1. Open the .txt or .csv custom POI location file. 2. Add or change file entries. (See page 124.) 3. Save the file. 4. Send the file to your TND. See page 135. Delete Custom POI Locations On your PC: 1. Open the .txt or .csv custom POI location file. 2. Delete all but one line record. 3. Save the file. 4.
TND Dock Install TND Dock Software Note: If a “Transfer Music” message displays, click Cancel to close the message and continue the installation. 1. Turn on your IntelliRoute TND 710 and allow it to power up. 2. Connect the TND to your computer using the USB cable. On the computer: 3. Click Run Rand McNally TND Dock The Welcome to Rand McNally Setup Wizard displays. 4. Click Next. The License Agreement Window displays. 5. Click on: I Agree button and tap Next to continue installation.
TND Dock Main Window 1 2 6 3 7 4 8 1 Sign Up for Road Construction Updates Click on this checkbox to sign up to automatically receive road construction updates. 2 Go to Rand McNally Website Click to view the Consumer website. 3 Update IntelliRoute TND Click to update your IntelliRoute® TND™ 710 software. 4 Backup/Restore IntelliRoute TND Click to backup your TND data. This button is also used to restore backed up data to your device.
Sign Up for Road Construction Updates On the TND Dock Main Window: 1. Click on the Sign Up for Road Construction Updates checkbox. The Free Road Construction Updates Window displays. 2. Enter your e-mail address in the provided fields. 3. To receive additional offers and information, select: • Receive Rand McNally product offers. • Receive Rand McNally newsletter. 4. Click Submit. The TND Main Window re-displays. Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Go to The Rand McNally Consumer Website Note: Connection to the internet is required to access the website. On the TND Dock Main Window: • Click on the Go to the Rand McNally Website link. The Rand McNally Consumer Home Page displays. Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Check for IntelliRoute TND Updates An exclamation mark next to the Update IntelliRoute TND button indicates that updates for TND software are available. There will also be periodic updates to TND Dock. You can retrieve software updates without being connected to the TND. After retrieving updates, you can later load them onto the TND without needing to connect to the internet. On the TND Dock Main Window: 1. Roll your mouse pointer over the Update IntelliRoute TND button and click Get Updates.
View IntelliRoute TND Information These logs are part of Rand McNally’s continuous improvement program and only contain information that can be used to diagnose software problems during device operation. No location, tracking or personal information is included. On the TND Dock Main Window: 1. Click on the Show IntelliRoute TND Info button. The IntelliRoute TND Info Window displays. 2. To send logs to Rand McNally, click on the Send Logs button. The Send Logs to Rand McNally Window displays. 3.
Backup TND Information The backup is created on your personal computer. Internet access is not required to use this feature. Rand McNally respects your privacy and cannot access or back up your personal information. On the TND Dock Main Window: 1. Roll your mouse pointer over the Backup/Restore IntelliRoute TND button and click Backup My IntelliRoute TND. The TND Dock Window displays. 2.
Restore TND Information On the TND Dock Main Window: 1. Roll your mouse pointer over the Backup/Restore IntelliRoute TND button and click Restore My IntelliRoute TND. The Restore1 Window displays. 2. Click on the type of restore to be performed: • Restore All - Restore device software and personal data, such as trips and address book. Note: Select the Restore All option only when instructed to do so by Rand McNally Customer Support Personnel.
View Manual Note: Adobe Acrobat Reader is required to view the IntelliRoute® TND™ 710 User’s Guide On the TND Dock Main Window: • Click on the Read Intelliroute TND Manual button. The User’s Guide displays in an Adobe Acrobat Reader Window. Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Tell Rand McNally On the TND Dock Main Window: 1. Click on the Tell Rand McNally button. The Tell Rand Window displays. Comments you have previously entered on your TND are listed. 2. To add a comment, click Add Comment and enter information in the provided fields. 3. To delete a comment, click on the comment and click Delete Comment. Note: To receive a personal response from Rand McNally, include your email address somewhere in the message text. 4. When finished, click Done.
Send Custom Locations File to Your TND Note: You only need to load the file once. Once loaded they remain on your device until onto your TND. You do not have to repeat the process. 1. Turn the TND on. 2. Connect the TND to your computer using a USB cable. 3. Start TND Dock and select the Send Custom Locations to my TND button. 4. Select the custom POI file and follow the instructions to transfer it to your TND 5. Turn off the TND. 6. Disconnect the device from your computer. 7.
Go to the Rand McNally Commercial Transportation Website Note: Connection to the internet is required to access the website. On the TND Dock Main Window: • Click on the Go to Rand McNally’s Commercial Transportation Website button. The Rand McNally Commercial Transportation Home Page displays. Rand McNally IntelliRoute® TNDTM 710 User’s Guide Version 2.0.
Export State Mileage Breakdown File Use this feature to export a mileage breakdown by state. The exported file can be in .xls or .csv format. On the TND Dock Main Window: 1. Click on the Export State Mileage Breakdown File. The Save As window displays. 2. Select where you want the file to be downloaded, and click Save. The file is download to your PC. When finished, a notification message displays. 3. Click Ok. 4. Use Windows Explorer to navigate to and open the file.
Index C A address create a group ....................................................................... 60 remove an address from a group ................................... 62 select a location from a group......................................... 63 address book................................................................................. 57 add an address to a group ................................................ 61 save a location ....................................................................
custom POI select from the POI window ............................................. 41 D destination confirmation window truck-related Point of Interest.......................................... destination confirmation windows....................................... address ..................................................................................... address book ......................................................................... consumer Point of Interest ....................................
L locations about city and street names ............................................ auto-complete ...................................................................... expand search ....................................................................... find addresses ....................................................................... find nearby points of interest (POI) ............................... way to search for ..................................................................
R Rand MCRA view information ............................................................... 102 reset the device ............................................................................ 12 restore GPS information......................................................... 132 road construction sign up for updates .......................................................... 127 route between two major cities calculate ...............................................................................
tapping on the screen ............................................................... 15 tap the map and find a location............................................. 52 Tell Rand send a message ................................................................. 103 about a different location .......................................... 104 about current location ................................................ 103 select a location by tapping map............................ 105 timers and logs..................
volume, decrease ........................................................................ volume, increase .......................................................................... volume, mute ................................................................................ volume settings ........................................................................... volume, unmute .......................................................................... 19 19 19 19 19 W warnings, set .....................
