Specifications
1 - 1
SECTION 1 SPECIFICATIONS
GENERAL
• Frequency range : TX
RX
144.000–148.000 MHz
144.000–146.000 MHz
136.000–174.000 MHz*
136.000–174.000 MHz*
144.000–146.000 MHz
[USA]
[EUR]
[EXP], [CSA]
[USA], [EXP], [CSA]
[EUR]
*Specifi cations are guaranteed within 144.000 to 148.000 MHz range only.
• Operating temperature range : –10°C to 60°C; +14°F to +140°F
• Operating mode : F2D, F3E, F7W* (*with optional digital unit UT-118)
• Frequency stability : ±2.5 ppm (–10°C to +60°C; +14°F to +140°F)
• Antenna impedance : 50 Ω (BNC Type)
• Power supply requirement : Specified Icom's battery pack only (Operating voltage range; 6.0–10.3 V)
• Number of memory channels : 207 channels (Including 6 scan edges and 1 call channel)
• Scan types : Program/Memory/Skip/Priority/Tone scans
• Tuning steps : 5, 10, 12.5, 15, 20, 25, 30 and 50 kHz
• Current drain (at 7.2 V DC; approx.) : TX
RX
High
Middle
Low
Max. audio
Stand-by
Power save
2.6 A
2.0 A
1.0 A
Less than 250 mA
Less than 80 mA
Less than 30 mA
• Dimensions (Projections not included) : 54.0 (W) × 139.0 (H) × 41.1 (D) mm; 2
1
/8 (W) × 5
15
/32 (H) × 1
5
/8 (D) in.
• Weight (except antenna, battery pack) : Approx. 200 g (7
5
/32 oz)
• Data connector : 3-conductor 2.5 (d) mm (
1
/
10
")
TRANSMITTER
• Output power (at 7.2 V DC) : 7.0 W (High), 4.0 W (Middle), 0.5 W (Low)
• Modulation system : Variable reactance frequency modulation
• Maximum deviation : ±2.5 kHz (Narrow), ±5.0 kHz (Wide)
• Spurious emissions : Less than –60 dBc
• Ext. microphone connector : 3-conductor 2.5 (d) mm (
1
/
10
")/2.2 kΩ
RECEIVER
• Receiving system : Double conversion superheterodyne system
• Intermediate frequencies : 1st; 46.35 MHz, 2nd; 450 kHz
• Sensitivity : Less than –14 dBµ at 12 dB SINAD (0.16 µV typ.)
• Squelch sensitivity (at threshold) : Less than –16 dBµ (0.11 µV typ.)
• Selectivity : More than 55 dB (Wide; 65 dB typ.)
More than 50 dB (Narrow)
• Intermodulation : More than 55 dB (65 dB typ.)
• Spurious image rejection : More than 60 dB (80 dB typ.)
• Audio output : More than 300 mW at 10% distortion with an 8 Ω load
• Ext. speaker connector : 3-conductor 3.5 (d) mm (
1
/
8
")/8 Ω
All stated specifications are subject to change without notice or obligation.