User Manual

5
2. Connect and Start DJing!
1. Make sure you have downloaded and installed the latest version of the software.
2. Place Twelve on a flat, stable surface.
3. While the power is switched off, plug the included power cable into Twelve first, then plug
the cable into a power outlet.
4. Power on Twelve using the power switch.
5. Use a standard USB cable (included) to connect the USB Port to one of the following:
• If you are using Twelve with the Rane Seventy-Two mixer (sold separately), connect
the USB cable to the Deck 1 or Deck 2 USB ports labeled Twelve/Controller.
• If you are using another mixing interface, connect the USB cable to an available
USB port on your computer or a powered hub connected to the computer.
6. Open Serato DJ Pro and go! For more information on how to use Serato DJ Pro with
Twelve, visit support.serato.com.
Example 1
Example 2
Computer
Power Power
Rane
Seventy-Two
Supported Serato
DJ Pro Device
(e.g., Rane SL4)
Computer
Power