Manual
Manual-2
CP 64 FRONT PANEL
PAGING ZONE ASSIGN switches select the zone(s) a Page signal is sent to. e RMT position activates the rear panel RMT
ZONE ASSIGN port, allowing the optional PR 2 wired remote to assign the active page Zone(s).
ACTIVE indicators light when a Page input signal reaches the Page Detect reshold. Note that a Page is always Active when its Page
Detect reshold is set to minimum.
ZONE 1 and ZONE 2 PAGING LEVEL controls adjust the Paging Level in each Zone.
PROGRAM INPUT LEVELS “stereo”controls allow independent adjustment of level for each Program Input.
DUCKER OFF/ON switches turn the Ducker ON or OFF for each Zone.
DUCKER DEPTH controls allow setting Ducker Depth (the amount of Program attenuation during a Page) from 50 dB (ccw) to
6 dB (cw) for each Zone.
ZONE PROGRAM SELECT switches assign one of four Program Inputs in each Zone.
ZONE RMT switches, when pushed in, enable the Remotes port for a Zone. is turns control of Zone Level and Zone Program
Select over to the Remotes port. Front panel Zone LEVEL and Zone PROGRAM SELECT controls are inactive when RMT is
selected. Two optional wired ZR 1 remotes may be connected to the Remotes port. An object smaller in diameter than the switch
button is required to engage the RMT switches.
ZONE SIG and OL indicators show SIGnal present at -20 dBu and OverLoad at -16 dBu (4 dB before clipping) respectively.
Signal indicators are located pre-EQ and pre-VCA.
ZONE LEVEL controls adjust the overall Level for a given Zone.
ZONE graphic EQ controls are provided for each Zone. Zone 1 controls are “stereo,” with each slider controlling the response of
both Left and Right channels. ese controls allow ±12 dB adjustment of seven ISO center frequencies on two octave centers.
POWER indicator lights when the CP 64 is connected to a powered RS 1 power supply.
RMT
BOTH
Z1 Z2
L1 P
L2 L3
RMT
BOTH
Z1 Z2
ZONE 1 ZONE 2
PAGING
ZONE ASSIGN LEVEL
L1 P
L2 L3
4k630 1.6k40 100 250
10k
4k630 1.6k40 100 250
10k
CP 64
ACTIVEACTIVE
PAGE 1 PAGE
2
ONOFF
SIGRMT OL
DUCKER
SELECT
PROGRAM
DEPTH
LINE 1 LINE 2 LINE 3 PRIORITY LEVEL
ONOFF
SIGRMT OL
DUCKER
SELECT
PROGRAM
DEPTH
LEVEL
PROGRAM INPUT LEVELS ZONE 1 ZONE 1ZONE 2 ZONE 2
POWER
100
2
4
8
6
100
2
4
8
6
100
2
4
8
6
100
2
4
8
6
100
2
4
8
6
100
2
4
8
6
10
2
4
8
6
10
2
4
8
6
12
•
6
•
•
•
6
12
0
+
12
•
6
•
•
•
6
12
0
+
COMMERCIAL
PROCESSOR
1 6 8 10
2 3 4 5 7 9 11 12