Instruction Manual

DA 216a
DISTRIBUTION AMPLIFIER
Data Sheet-4
All features & specifications subject to change without notice. DOC 104637 PN 11888
©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5098 TEL [phone] FAX [phone] WEB http://www.rane.com
Rear Panel
Arhchitectural Specifications
The distribution amplifier shall have two (2) inputs and
sixteen (16) outputs. The unit shall be capable of mono (16
mono outputs) or stereo operation (8 stereo outputs) via front
panel switches. Each output shall be assignable to either or
both of the master inputs.
Each input shall be microphone or line level switchable by
means of rear panel switches. Additional 20 dB gain switches
shall be built-in for each input, applicable to either a mic or
line level signal. Each input shall have a front panel screw-
driver level adjustment. 15V phantom power shall be pro-
vided via a rear panel switch for microphone inputs.
Each output shall have a front panel screwdriver adjust-
ment. Inputs and outputs shall be active balanced screw
terminal connectors.
The unit shall be exempt from agency safety requirements
and powered from a UL listed / CSA certified (120 VAC), or
CE approved (230 VAC) remote power supply. The unit shall
be constructed entirely from cold-rolled steel, and mount into
a standard 19" 1U EIA rack.
The unit shall be a Rane DA 216a Distribution Amplifier.
Available Accessories
• SC 1.7 Single Space Security Cover