OL ACTIVE dB -80 ON +4 dBu MIN MAX 0 DUCKER DETECT PRIORITY GAIN -12 +12 dBu TARGET LEVEL 1:1 ∞ :1 RATIO SLOW FAST AGC -12 -6 -3 0 GAIN 3 6 12 80 110 150 200 FREQUENCY CROSSOVER +12 FULL HIGH LOW -12 1 +12 FULL HIGH LOW -12 2 +12 4 +12 FULL HIGH LOW -12 OUTPUTS FULL HIGH LOW -12 3 +12 FULL HIGH LOW -12 5 +12 FULL HIGH LOW -12 6 POWER DISTRIBUTION AMPLIFIER WITH PAGING DA 26 DISTRIBUTION PROCESSOR DA 26
IMPORTANT SAFETY INSTRUCTIONS For the continued safety of yourself and others we recommend that you read the following safety and installation instructions. Keep this document in a safe location for future reference. Please heed all warnings and follow all instructions. Do not use this equipment in a location where it might become wet. Clean only with a damp cloth. This equipment may be installed in an industry standard equipment rack.
OPERATORS MANUAL DA 26 DISTRIBUTION AMPLIFIER PRIORITY GAIN DETECT DUCKER TARGET LEVEL CROSSOVER AGC OUTPUTS 1 RATIO 2 3 4 5 6 DA 26 FREQUENCY MIN MAX OL ON +4 dBu -80 ACTIVE dB 0 -12 +12 dBu 1:1 GAIN ∞ :1 SLOW FAST -12 -6 -3 0 -12 3 6 12 80 110 150 200 +12 FULL HIGH LOW -12 +12 FULL HIGH LOW -12 +12 FULL HIGH LOW -12 -12 +12 FULL HIGH LOW +12 FULL HIGH LOW -12 DISTRIBUTION PROCESSOR +12 FULL HIGH LOW POWER QUICK START Are you in a hurry? For optimum sys
FRONT PANEL DESCRIPTION PRIORITY GAIN DETECT DUCKER TARGET LEVEL CROSSOVER AGC OUTPUTS 1 RATIO 2 3 4 5 6 DA 26 FREQUENCY MIN MAX OL ON +4 dBu -80 ACTIVE dB 0 -12 +12 dBu 1:1 GAIN ∞ :1 SLOW FAST -12 -6 -3 0 -12 3 6 12 80 110 150 200 +12 FULL HIGH LOW -12 +12 FULL HIGH LOW -12 +12 FULL HIGH LOW -12 +12 FULL HIGH LOW -12 +12 FULL HIGH LOW -12 DISTRIBUTION PROCESSOR +12 FULL HIGH LOW POWER 1 PRIORITY GAIN trim and OL indicator: adjusts the gain for the PRIORI
REAR PANEL DESCRIPTION DA 26 POWER MADE IN U.S.A. RANE CORP.
Setup & Operation…continued from page Manual-1... 4. Next, set up the six OUTPUTS. First, determine the number of zones served and the signals to be sent to each. Using a drawing like the example application diagram in the Data Sheet is helpful. For ease of wiring, make Outputs serving a common zone adjacent. Select Full-range, High-pass or Lowpass as required for each output. The following are possible zone configurations: • Full-range only for medium size bookshelf speakers.