Manual
Manual-3
Penny & Giles Faders
• Most respected, highest quality analog faders available:
°
Very high performance, long life and low maintenance.
°
Excellent Feel.
°
Rated for 2 million cycles.
°
Two kinds of fader caps are provided with each mixer for dierent preferences:
°
soft rubber caps for smooth mixing.
°
hard plastic caps for fast mixing.
• ese faders meet the requirements of the most demanding turntablist.
• Caution!
°
Do not disrespect your Penny & Giles faders.
°
Precision parts deserve proper care.
°
Read and follow care instructions:
°
Do not spray any lubricant or cleaner in the fader;
e resistive element is cleaned with warm water and lint free cloth.
°
Do not spray lubricant on the slide mechanism —
Apply a drop of silicone lubricant directly on rod.
°
When in doubt, give Rane a call: 425-355-6000.
°
Failure to follow these simple instructions may aect the performance of the pot and will void the warranty.
°
See the service and replacement instructions on page Manual-7.
• CONTOUR controls are provided for Input-1 and Input-3 faders.
°
Allows any fader response from SLOW smooth fade to FAST cut.
• CONTOUR control provided for the Crossfader.
°
Allows any response from SLOW smooth blend to FAST cut.
Advanced Cue selection
• ree position switch allows automatic “Flash-Cue” or individual Cue selection:
°
Set switch to “A” to Cue all channels assigned to the A-side of the Crossfader.
°
Set switch to “B” to Cue all channels assigned to the B-side of the Crossfader.
°
Set switch to center position for manual Cue selection using individual Cue switches.
• Individual Cue switches with green indicators are provided for:
°
Input channel-1
°
Input channel-2
°
Input channel-3
°
AUX Input
°
FlexFX RETURN
Headphone Monitor
• Headphone monitor source is decided by two controls:
SPLIT CUE switch
CUE / MASTER pan control.
• SPLIT CUE switch “OUT”:
CUE / MASTER control pans between stereo Cue selection and stereo Master mix.
• SPLIT CUE switch “IN”:
CUE / MASTER control pans between:
mono-Cue in the left channel
and mono-Master in the right channel.
• Headphone LEVEL control determines the loudness.
• Two-band Headphone EQ:
Maximum boost: 12 dB
Maximum cut: -12 dB
Center frequency: 1 kHz.
• 3.5 mm and ¼" jacks provided.
-12
-4
-8
8
4
0
+12
AUX IN
CUE
CUE
RETURNAUX
POST
AB
POST
AB
CUE
AB
CUE
LEVEL
PHONES
EQ
AB
POST
SPLIT CUE CUE MASTER
CUE
LOW HIGH
100
2
4
8
6
100
2
4
8
6
2
0
4
8
6
10
2
0
4
8
6
10
SLOW FAST
1
CONTOUR
CROSSFADER
3
SLOW FAST SLOW FAST