user manual

Data Sheet-4
M S 1S
MICROPHONE STAGE
All features & specications subject to change without notice. DOC 104514
©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5000 USA TEL [phone] FAX [phone] WEB www.rane.com
Architectural
Specifications
e microphone preamplier shall be a
single channel stand-alone unit with a
removable IEC power cord. e unit shall
accept voltages from 100 to 240 VAC.
e input and output shall be tted with
XLR connectors. A polarity inverting
switch shall be included. Phantom power
of no less than 48 volts shall be provided
in compliance with IEC 60268-15 and be
controlled by a slide switch with an LED
indicator. A gain control shall be provided
with 18-66 dB adjustment range. Power,
system signal and overload indicators shall
be provided. High current cross-coupled
active output line driver shall be standard,
as well as input RFI lter protection.
e unit shall be a Rane MS 1S Micro-
phone Stage.
MIC INLINE OUT
NORMAL
POLARITYPOWER
INVERT
MADE IN U.S.A. RANE CORP.
MS 1S
50/60 Hz 3 WATTS
100-240 V
PIN 2: (+)
PIN 3: (
– )
PIN 1:
THIS DEVICE
COMPLIES WITH PART
15 OF THE FCC RULES
FOR A CLASS ‘B’
COMPUTING DEVICE.
ACN 001 345 482
4.26"
0.15"
2.5"
6.8"
6.1"
.7"
0.775"
0.35"
4.225"
1.636"
MAXMIN
2
4
8
6
MS 1S
MIC STAGE
GAIN
OLSIG 48V PHANTOM
ON
POWER
Front, Top & Rear Panel Dimensions