Owner's manual

Manual-2
FRONT PANEL DESCRIPTION
 SIGnal present/OverLoad LED. This bi-color LED lights green for a -30 dBu signal, and turns red when the Input is
within 3 dB of clipping.
 MONO MIC/LINE INPUT LEVEL controls 1-4 determine the MIC/LINE preamp gain and mix level to be assigned to
A, A+B, B outputs.
  A/A+B/B switches determine the output for each MIC/LINE input.
 STEREO LINE INPUT LEVEL controls 5-8 determine the amount of stereo or mono line Input routed to the Outputs.
 MONO switch mixes the A and B sides of each STEREO LINE input together. When active, the associated LED lights, and
the A and B Inputs for that channel have exactly the same level.
 OUTPUT OverLoad LED illuminates within 3 dB of an approaching overload condition. To avoid this, the associated
OUTPUT LEVEL control may be decreased, or the problem-causing individual Input Level may be lowered.
 A and B OUTPUT LEVEL controls set the Output Level for A and B outputs.
 POWER LED is lit whenever adequate power is applied to the unit.