Installation guide

10
Recommended Calibration Procedure
e CP52S is a very versatile instrument. While this allows it to conform to the requirements of a large number of system applica-
tions, it also results in complexity. For this reason, it is very important to use an organized approach to system calibration. Once the
system is connected, take the time for proper calibration. e following is an ordered list of system adjustments to make calibration
easy with optimum performance results.
is procedure assumes that a microphone is used for the Page. e procedure (except for the exact wording) is the same for other
Page sources.
Make sure the POWER is o!
PREFLIGHT CONTROL SETTINGS
PAGING SETTINGS:
• MIC/LINE Pad As required (front panel)
• INPUT TRIM 12:00 (center) (front panel)
• DETECT THRESHOLD Min (ccw, Active) (front panel)
• PAGING LEVEL Min (front panel)
• LIMIT THRESHOLD +20 dBu (front panel)
• MIC PHANTOM POWER As required (rear panel)
• LOW / HIGH CUT FILTER As required (rear panel)
• PAGE LEVEL TRACKS ZONE LEVEL OFF (rear panel)
PROGRAM INPUT SETTINGS:
• Input Levels Min (front panel)
• PRIORITY DETECT THRESHOLD Set to -50 dBu at factory (range -∞ to -35 dBu; rear panel)
• PRIORITY RELEASE TIME Set to 12 sec. at factory (range 5 to 20 sec; rear panel)
• PRIORITY OFF / ON OFF (rear panel)
ZONE SETTINGS:
• DUCKER DEPTH 2:00 (about 15 dB) (front panel)
• DUCKER OFF / ON OFF (front panel)
• PROGRAM SELECT LINE 1, 2, 3 or P (Any active Input; front panel)
• REMOTE Out (local control) (front panel)
• Zone LEVEL Max (front panel)
• LIMIT THRESHOLD +20 dBu (front panel)
• Equalizer Flat (front panel)
• Zone Output MONO As required (rear panel)
• Expand ZONE/PROGRAM/PAGE As required (rear panel)
SYSTEM CONNECTIONS
• Connect page microphone or line level paging source
• Connect Program sources
• Connect Output to amps
• Connect ZR1 Remote control (if required)
...You are now ready to calibrate the CP52S (continued on next page...)
LEVEL
4k
630
1.6k
40
100
250
PROGRAM
SELECT
OL
SIG
LIMIT
10k
PRIORITY
LIMIT
THRESHOLD
LIMIT
LEVEL
LINE 1
LINE 2
LINE 3
ACTIVE
INPUT
TRIM
OL
LINE
MIC
ON
OFF
DETECT
THRESHOLD
DUCKER
DEPTH
CP52S
COMMERCIAL
PROCESSOR
POWER
ZONE
EQ
PROGRAM INPUT LEVELS
PAGING
LIMIT
THRESHOLD
REMOTE
L1
P
L2
L3
+60+30
12
•
6
•
•
•
6
12
0
+
+8
–3
+20–20
+16
+8
–3
+20–20
+16
10
0
2
4
8
6
2
8
10
0
4
6
10
0
4
6
10
0
4
6
10
0
4
6
10
0
2
4
8
6
PRIORITY
3
2
1
+
–
+
–
+
–
+
–
+
–
+
–
+
–
+
–
D1
D0
D1
D0
Vr
Vc
Vr
Vc
DETECT
THRESHOLD
RELEASE
SEC
PAGING INPUT
R
L
R
L
5
20
ZONE REMOTE
ZONE OUTPUT
MIN
MAX
PROGRAM
INPUTS
RIGHT
LEFT
MONO
EXPAND
LEVEL
PROGRAM
LEVEL
OFF
ON
100-240 V
50/60 Hz 12 WATTS
ZONE
PAGE
SOURCE
PROGRAM
INPUT
LOW / HIGH
CUT
FILTER
PAGE LEVEL
TRACKS
ZONE LEVEL
MIC
PHANTOM
POWER
IN
OUT
OFF
ON
OFF
ON
100 Hz / 7 kHz
+15V
EXPAND OUTPUT
COMMERCIAL AUDIO
EQUIPMENT 24TJ
R
ALL AUDIO AND REMOTES ARE CLASS 2 WIRING
MADE IN U.S.A. RANE CORP.
CP52S