Installation guide
5
CP52S
COMMERCIAL PROCESSOR
General Description
e CP52S is a versatile commercial preamplier designed for
use in restaurants, bars, health clubs and oces. e CP52S
serves one stereo Zone. One gated Paging Input and four stereo
Program Inputs are provided. A Port allows expansion of Page,
Program or Zone signals. ree levels of priority are supported:
1. Page
2. Program Priority
3. Non-Priority Program
e Paging Input is summed after Zone Level, Zone EQ
and Zone Limiter circuits. If the Page Level Tracks Zone Level
switch is on, the Page level tracks the Zone Level.
One of four stereo Program Inputs may be selected. Each line
level Program Input features an independent Level control.
A gated Program Priority Input is provided. When the rear
panel Priority switch is ON and signal is detected at the Prior-
ity Input, it overrides any non-priority Program selection. e
detector features adjustableDetect reshold and Release Time
controls.
Several levels of security are available. e SC 1.7 is an
optional security cover for the entire unit. e SCP1S is an
optional EQ-slider-only security cover. Any front panel control
knobs may be removed and replaced with hole plugs provided
with the SCP1S.
Gated Paging Circuit Features
• Mic/Line Selection with Gain Trim
• Phantom Power Switch
• Low / High Cut Filter Switch
• Adjustable Detector Threshold with Active LED
• Paging Level Control
• Switchable Page Level Tracks Zone Level
• Page Input Servo-Locked™ Limiter
Zone Output Features
• Level Control
• 1 of 4 Program Select
• Ducker On/O with Depth Control
• Output Servo-Locked™ Limiter
• 7-Band Equalizer (±12 dB)
• Wired Zone Remote Port for Level and Program Selection
Special Features
• Page Initiated Program Ducking
• Gated Stereo Program Priority Input
• Page/Program/Zone Expansion with Level Control
• Universal internal switching power supply (100-240 VAC)
SCP1S Equalizer Security Cover