Installation manual

MONGOOSE
Installation Manual
32
4. You can now begin testing the audio. First, we’ll discuss testing the audio input.
a. Select a RAD output channel to use for your test. Plug an audio output device into it (for
example, a loudspeaker).
b. Select a RAD input channel to test. Plug an input device into the RAD (for example, a
microphone).
c. Using the audio routing matrix in the Mongoose Tracker software, route the input RAD
channel to the output RAD channel. For details on working with this matrix, see the
Mongoose Tracker help system.
d. Make some noise! Speak into the microphone, play a CD, or do whatever is appropriate
for the type of input channel you are testing. Verify that the audio reaches the output
device.
e. Repeat the above steps for each RAD input channel you want to test. You will need to
change the routing matrix each time you test a different channel.
5. Now test the audio output. is step is much quicker!
a. Select a RAD input channel to use for your test. Plug an audio input device into it.
b. Plug an audio output device into each of the RAD output channels you want to test.
c. Create an audio routing matrix that routes the audio input to all of the audio output
channels you are testing.
d. Make some more noise! Speak in to the microphone or play a CD, etc. Verify that the
audio reaches each output device.