Operator`s manual

MP 4 - OPERATOR’S MANUAL 1.8.2
21
Scratch LIVE allows you to record one of six
stereo signals from the MP 4:
• Mic
• Program A
• Program B
• Main Mix
1. Click on the downward arrow (icon) to get the
drop menu displaying the six possible record
sources.
2. Select the desired source and press the record
icon to start
recording.
3. The record icon flashes while recording and
the display shows the elapsed recording time.
4. Press the record icon again to stop the
recording.
5. To save the recording, type in a name for the
recording and click the save icon.
6. The recording is automatically placed in a
crate named “RECORDED”. If the crate does not
already exist, it will be created automatically.
7. To start a new recording without saving, simply
click the record button again.
Recordings can be loaded onto the decks,
renamed, and managed like other files.
Recordings are saved in “MyDocuments\My-
Music\ScratchLIVE\Recording” on a PC and “~/
Music/ScratchLIVE/Recording Temp” on a Mac.
Recordings are saved as 16-bit, 44.1 kHz stereo
AIFF files.
TIPS.
The keyboard shortcut ctrl-n turns recording
on and off
You can load a recording without saving it
using the short cut keys shift left arrow to
deck 1 or shift right arrow to deck 2.
If the Virtual Deck is set to int mode and
is unloaded, the input record level is sent to
the Virtual Deck’s higher resolution stereo
meters. E.g., if you’re recording from input
2, set the right Virtual Deck to int, eject the
track if there is one loaded, and the Virtual
Deck’s meters will show the signal coming
into input 2.
NOTE: Any recordings over 3 hours are
automatically split into individual files.
RECORDING