Owner's Manual
RANE]
RPI
Manual
Version
v1
.0
Introduction
&
Support
Thanks for purchasing the Rane RPI. The
RPI
is
a remote power injector that supplies the necessary power to the
DR6
or RAD26
peripherals for rack-mountable HAL units.
Use standard screws of
an
appropriate size
to
attach the
RPI
to a wall, ceiling, or other surface. Use shielded Cat
Se
(or better)
cables to connect it to any HAL unit to deliver communications and the extra power needed for the peripheral.
For system applications, design examples and related HAL information, please see the HAL Notes library at rane.com/library
If you need additional assistance, please contact our HAL technical agents at halogen@rane.com
For additional product support, visit rane.com/support
Overview
Wiring
Use shielded
Cat
Se
cables (or better)
to
connect your HAL
peripheral and HAL rack unit to
RPI.
The
RPI
can be placed
anywhere
in
between the two.
Technical
Specifications
Supported HAL Peripherals
DR6,
RAD26
Mounting Hardware 4 screws, not included
-
Connectors
-
Data Input To
DR
port on HAL unit
---
Data Output To HAL peripheral
Power 24 VDC @ 500 mA
Maximum
Distance
of
HAL to
RPI
to
325
ft.
/ 100 m Maximum
HAL peripheral
Power 100-240 VAC
-
--
-
Wiring
Class2
-
To power outlet.
--
---
-
For mounting
RPI
to surface.
-
-
RJ-45 connector
RJ-45 connector
IEC
connector
Shielded CAT 5e cable or bett er
50/60
Hz,
18 W maximum
-
RJ-45 connectors
Operating Temperature 104°F / 40°C Maximum external loading
- - -
Dimensions 6.90" X
2.
79" X 1 . 78" 17.5 x
7.1
x 4.5 cm Width x depth x height
Weight
14.1
oz.
400g
Specifications are subject
to
change without notice. Rane is a trademark
of
inMusic Brands, Inc., registered
in
the U.S. and other countries. All
other product names, company names, trademarks, or trade names are those
of
their respective owners.
rane.com
NF04883-1.0