Owner's Manual
Important
Safety
Instructions
1. Read and keep these instructions. Heed all warnings and
follow
all Instructions.
2. Do
not
use
this
apparatus near water.
3. Clean only
with
dry
cloth.
4. Do
not
block
any
ventilation openings. Install in
accordance
with
the
manufacturer's instructions. Do
not
install
this
equipment
in a
confined
or
"boxed-in"
space
such as a
bookcase
or
similar unit,
and
maintain
good
ventilation conditions. The ventilation
should
not
be
impeded
by
covering
the
ventilation
openings
with
items
such
as
newspaper, tablecloths, curtains, etc.
5. Do
not
install near
any
heat sources such as radiators, heat registers, stoves,
or
other
apparatus (including amplifiers)
that
produce
heat. Do
not
place
exposed
flame sources
such
as lighted candles
on
the
apparatus.
6. Do
not
defeat
the
safety
purpose
of
the
polarized
or
grounding-type
plug. A polarized plug has
two
blades
with
one
wider
than
the
other. A
grounding
type
plug
has
two
blades
and
a
third
grounding
prong. The
wide
blade
or
the
third prong is provided
for
your
safety.
If
the
provided plug
does
not
fit
into
your
outlet,
consult
an electrician
for
replacement
of
the
obsolete outlet.
7. Protect
the
power
cord
from
being walked
on
or
pinched
particularly
at
plugs, convenience receptacles, and
the
point
where
they
exit from
the
apparatus.
~
8. Only use attachment/accessories specified
by
the
manufacturer.
~
9. Use only
the
cart, stand, tripod, bracket
or
table specified
by
the manufacturer,
I)(
sold with the apparatus
(If
applicable). ,
"'-
1
When a cart is used, use caution when moving
the
cart/apparatus combination
to
avoid injury from tip-over.
1•
10.
Unplug
this apparatus
(luring
lightning
storms
or
when unused
for
long periods
of
time.
~~
11
. Refer all servicing
to
qualified service personnel. Servicing is required when
the
apparatus has been damaged in
any
way,
such
as
power-supply
cord
or
plug
is
damaged, liquid
has
been spilled
or
objects
have fallen into
the
apparatus,
the
apparatus has been
exposed
to
rain
or
moisture,
does
not
operate normally,
or
has been
dropped.
12.
Power
Sources: This
product
should
be
connected
to
a
power
supply
only
of
the
type
described in
these
operating instructions,
or
as marked
on
the
unit.
13. Internal/External Voltage Selectors (if applicable): Internal
or
external voltage selector switches,
if
any, should
only
be reset and re-
equipped
with
a
proper
plug
for
alternative voltage
by
a qualified service technician. Do
not
attempt
to
alter this yourself.
14.
Water
and Moisture: This
product
should
be
kept
away
from
direct
contact
with
liquids. The
apparatus
shall
not
be
exposed
to
dripping
or
splashing
and
that
no
objects
filled with liquids, such
as
vases, shall
be
placed on
the
apparatus.
15. Caution
Of
applicable): Danger
of
explosion
if
battery
is incorrectly replaced. Replace only
with
the
same
or
equivalent type.
Batteries
(a
battery
pack
or
an installed battery) shall
not
be
exposes
to
excessive heat
such
as
sunshine, fire, etc.
16. Where
the
mains plug
or
an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
17. Protective earthing terminal
(If
applicable): The apparatus should
be
connected
to
a mains
socket
outlet
with a
protective
@
earthing connection.
~
•
Denmark
(!)anmarl<):
Apparatets stikprop skal tilsluttes en stikkontakt
med
jord, som giver forbindelse til stikproppens jord. -
• Finland (Suom1): Laite on iiitettava suojakoskettimilla varustettuun pistorasiaan.
• Norway {Norge): Apparatet
mil
tilkoples
jordet
stikkontakt.
•
Sweden
(Sverige): Apparaten skall anslutas till
jordat
uttag.
[g]
18. (If applicable) This symbol means
the
equipment
is a Class
II
or
double-insulated electrical appliance. It has been designed D
in
such
a
way
that
it
does
not
require a safety connection
to
electrical earth.
19. Warning (if applicable): Provide an earthing connection before
the
mains
plug is
connected
to
the
mains. When
disconnecting
the
earthing connection, be sure
to
disconnect
it
after pulling
the
mains plug
out
from
the
mains.
20. This apparatus is
for
professional use only. Intended operational climate: tropical, moderate.
21
. When moving
or
not
using
the
appliance, secure
the
power
cord (e.g.,
wrap
it
with a
cable
tie).
Be
careful
not
to
damage
the
power
cord. Before using it again,
make
sure
the
power
cord
has
not
been
damaged.
If
the
power
cord
has been
damaged
at
all, bring
the
unit
and
cord
to
a qualified service technician
for
repair
or
replacement as specified
by
the
manufacturer.
22. Warning (if applicable): Excessive
sound
pressure (high volumes) from headphones can cause hearing loss.
23. Warning (if applicable): Please refer
to
any
important
information (e.g., electrical, safety, etc.) printed
on
the exterior
bottom
enclosure
or
rear panel before installing
or
operating
the
product.
Service
Instructions
• Disconnect
power
cord
before servicing.
• Replace critical
components
&.
only
with
factory
parts
or
recommended
equivalents.
• For AC line
powered
units: Before returning repaired unit
to
user, use an
ohmmeter
to
measure from
both
AC plug blades
to
all
exposed metal parts. The resistance should be
more
than 2,000,000 ohms.
Safety
Notices
•
CAUTION:
TO REDUCE THE RISK
OF
ELECTRIC SHOCK, DO
NOT
REMOVE
ANY
Lh
COVER. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING
TO
QUALIFIED I Risk
of
electric shock.
SERVICE PERSONNEL
ONLY
.
■
Do
not
open.
DANGEROUS VOLTAGE: The lightning flash
with
arrowhead
symbol
within
the
equilateral triangle is intended
to
alert
the
user
to
the
presence
of
un-insulated "dangerous voltage" within
the
product's
enclosure
that
may
be
of
sufficient
magnitude
to
constitute a risk
of
electric shock.
INSTRUCTIONS: The exclamation
point
within
the
equilateral triangle
is
intended
to
alert
the
user
to
the
presence
of
2&
965
important operating
and
maintenance (servicing) instructions in
the
literature
accompanying
this
appliance. I
WARNING:
To
reduce
the risk
of
fire
or
electrical shock,
do
not
expose
this
appliance
to
rain
or
moisture. Electrical
■
equipment
should NEVER
be
kept
or
stored
in
damp
environments.
SA
1966
CAUTION (for U.8.A. & CANADIAN models
only):
TO PREVENT ELECTRIC SHOCK DO NOT USE Tl·llS (POLARIZED) PLUG WITH
AN
EXTENSION CORD, RECEPTACLE
OR
OTHER OVTLET UNLESS THE BLADES CAN
BE
FULLY INSERTED TO PREVENT BLADE EXPOSURE.
6