User Manual

:
Unassign the USB Source for the non-playing
Virtual Deck on Computer A. Then have
Computer B assign that same USB Source to
one of its Virtual Decks. 

.
 Play a track on this Deck and mix it in when
ready—you’ll now have audio from both
computers in the mix.
 Fade out the audio playing from the rst
computer to the audio playing from the second
computer.
 When only audio from the second computer is
left in the mix, remove the rst computer.
 Assign USB sources for the remaining Virtual
Decks on the second computer and continue
DJing.
additiOnaL Setup
This section covers general preferences and
adjustments you can make to improve the
performance of Scratch Live. From the top of the
main screen, click on Setup to get to this area.


cdpLayeR
This single turntable technique allows you to mix
as if you had two turntables, using just one. If
one of your turntables is not performing properly,
or if you only have one available, you will be able
to continue to mix the way you are used to.
The following is a step-by-step description
of how to perform a mix using only your right
turntable or CDJ with the instant doubles feature.
menu SettingS
Go to the Setup menu, click on the Playback
tab. Make sure  is checked, and
 is unchecked.
 Load a track onto the Right Deck in Scratch
Live and play as usual.
 Put the Left Deck into INT mode.
 Load the same song you have playing on the
Right Deck onto the Left Deck. The track on
the Left Deck will start playing from the same
point and at the same pitch as the Right Deck.
 You can now quickly slide your mixer’s
crossfader over to the Left Deck.
 Your Right Deck is now free to load up a new
song ready to mix in.
 Repeat!



RANE SL 4 FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.2.2
31