Operator`s manual

Manual-2
Getting started
1) Install the software
Mac
1. Insert the Software Installation CD-ROM and double-click
the installer icon.
Windows XP
1. Insert the Software Installation CD-ROM. If Setup doesn’t
start automatically, browse to the CD drive and run
setup.exe. Note: Select custom install to change the direc-
tory you wish to install Scratch LIVE into, and to install the
included MP3s.
2. Follow the on-screen instructions. Once the installation is
complete, Scratch Live appears in the Start Menu under All
Programs > Serato > Scratch Live.
2) Connect and install the hardware
Mac
Mac users need only connect the hardware after installing
the software. No extra hardware installation is required.
3. Insert the Software Installation CD-ROM if it’s not already
inserted, then press Next
.
4. Windows may complain that the software driver is not digi-
tally signed. Choose Continue Anyway.
5. Click Finish once installation is complete.
Windows XP
1. Connect the Scratch LIVE Interface to your computer using
the supplied USB cable.
2. e Windows New Hardware Wizard appears.
Windows XP treats each USB port individually. You might
like to install Scratch LIVE on all of your USB ports, so you can
connect the hardware to any port.