Quick start guide

16
• Mic 1 Setup: Select this option to edit the amount of feedback for the mic echo (Mic 1 Echo Fdbk), the
mic ducking threshold (Mic 1 Duck Thresh), or the ducking hold time (Mic 1 Duck Hold), or the mic 1
feed (Mic 1 Clean Feed).
Note: When Clean Feed is On, the Mic 1 will not pass audio while recording in Serato DJ Pro.
• Restore Defaults: Select this option to restore all of the Mixer Settings to their factory default values.
Cut-In Adjust: Select this page to enter the Cut-In Adjust setup menu. This controls the amount of dead
space between a fader's closed and open positions.
Flex FX: Select this page to view and edit the internal Flex FX settings.
• Beats Mult.: Select this option to determine the increments by which the Flex FX beat division
parameter can be adjusted (when adjusting this parameter on the main Display screen).
o In Extended Mode, you can set Flex FX to standard timings ranging from 1/32 to 32 beats as well
as dotted and triplet variants of each of these timings.
o In Simple Mode, which is the factory default, you can set Flex FX beats only to standard timings
(no triplet or dotted timings).
o In No Dotted Mode, the Flex FX beats include standard timings and triplets but no dotted timings.
o In No Triplet Mode, the Flex FX beats include standard and dotted timings but no triplets.
• Echo, Reverb, Brake, Flanger, Phaser, and Delay: Select one of these pages to edit a Flex effect’s
parameters. When you save a change to an effect parameter here, it will be made the default setting for
whenever you activate the effect. The effect parameters can also be changed from the Flex effect
parameter Display screen, but only changes made from this menu page will be saved after you power
off Seventy. See Effects for instructions on using the Flex effect parameter Display screen.
• Restore Defaults: Select this option to restore all of the Flex FX settings to their factory default values.
Instant Doubles Button Mode: Select this option to determine the default mode for each deck’s Instant
Doubles button:
• Instant Doubles: In this mode, press the button to load the deck’s track to the other deck.
• Sync: In this mode, press the button to automatically sync the deck’s tempo with the other deck. Hold
Shift and press the button to deactivate sync.
• Silent Cue: In this mode, press the button to mute the deck. To unmute the deck, hold Shift and press
the button.
Note: If a deck is muted when a Hot Cue is selected with one of the deck’s Performance Pads, the
deck will automatically unmute as the cued audio begins playing.
Factory Reset: Select this option to reset all of Seventy’s settings to their factory default values.