Owner`s manual

OWNER’S MANUAL
19
SIXTY-TWO
Internal Audio Effects
The internal effects engine is in the FlexFX Loop. This allows any combination of DECK 1, DECK 2, MIC and
AUX to be assigned to an effect. Individual effects are turned on/off using the six effects buttons. EXT.
INSERT and
INSERT are also engaged independently. The FlexFX Loop (which includes the External
Insert and the USB Insert) is turned On/Off with the FlexFX ON button (off bypasses the loop).
The six built-in effects are:
• FILTER • FLANGER
• PHASER • HOLD ECHO
• ROBOT • REVERB
General Behavior
• The effect multiplier is
saved for each effect.
• Changing BPM for one
effect changes the BPM for all effects.
• Tapping the BPM requires at least two taps.
• Changing the BEAT multiplier results in an immediate change in the effect time.
• Changing the effect BPM adjusts the multiplier for other effects so that the new multiplier is as close as
possible to the saved effect time.
Echo Effects
Echo is an audio effect which records an input signal and then plays it back after a period of time. The
delayed signal may be played back multiple times to create the sound of a repeating, decaying echo. The
amount of recirculation determines the echo decay rate. There are four available Echo options:
• Echo: No feedback lter and adjustable recirculation 0 to 70%.
• Duck Echo: Adjustable feedback lter and adjustable recirculation 0 to 70% (see Duck Echo below).
• Low-Cut Echo: Adjustable feedback lter and adjustable recirculation 0 to 70%.
• Low-Cut Hold Echo: Adjustable feedback lter and adjustable recirculation of 0% to 100%.
The feedback-lter types help reduce the “muddy” sound that can result when using a lot of
recirculation. The type of Echo is selected in the menu on the mixer in the "Echo Effect Options Menu"
on page 22, or in the "Rane Drivers" on page 26. Operation of the Echo controls is detailed in the
"Effects Parameter Table" on page 21.
Duck Echo uses a high-pass feedback lter like the Low-Cut Echo. In the presence of signal, the Duck
Echo operates 100% dry (no echo is heard). When signal is removed, the delay is enabled and operates
according to the DEPTH knob setting just like the standard High-pass Echo. This is great for having a song
echo out regardless of what terminates play (fader cut, song ends lter cut etc.).
CUE
DECK 1
CUE
USB AUX
CUE
DECK 2
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
HIGHLOW
10
0
2
4
8
6
MAINCUE
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
10
0
2
4
8
6
RIGHTLEFT
+6OFF
+6OFF
+6OFF
+6OFF
+6OFF
+6OFF
+6OFF
+6OFF
HIGHLOW
RIGHTLEFT
HIGHLOW
SYNC
BYPASS CLEAN FEED
SYNC OFF
START / STOPNUDGEBPM
SLIP
SYNC
SYNC OFF
SLIP
B B
A A
DECK 1MIC
DECK 1
AUX
SP-6 ASSIGN ON OVER
HIGH
LEVEL
LOW
FLEXFX
INSERT
TIME TAP
CUES 1 2 3 4 5
C D
543
SAMPLES 4 5 6321
21
BA
ON
CUE
EXT. INSERTFILTER
BEAT
FLANGER PHASER ECHO ROBOT REVERB
FLEXFX
BACK
LOAD
SCROLL
LOOPS
BEATS SELECT SELECT
SHIFT SHIFT
LEVEL
FILTER
FLEXFX
AUTO MANUAL
LOOP IN
ROLL OUT
SAVE
BEATS
LOOP
ROLL
SAVELOOP
IN
OUT
LOOP
DECK 2 MIX DECK 2
LEVEL
PHONES
SP-6 ASSIGN
BACK
LOAD
SCROLL
LOOPS
LEVEL
PAN
SPLIT CUE
MANUAL AUTO
LOW
MID
HIGH
LEVEL MAIN
SESSION OUT
SESSION IN
BOOTH
LOW
DEPTH
MID
HIGH
PH / CD PH / CD
SOURCE
PAN
1 2
FILTER
FLEXFX
SOURCE
PAN
3 4
FILTER
FLANGER +Fb
BPM:120 * 1:1
4000 ms