Owner`s manual

OWNER’S MANUAL
24
SIXTY-TWO
Mixer Shift Functions
In addition to the menu selections, the Shift button also accesses alternate functions for other buttons.
MIDI Start/Stop
Hold the SHIFT button and press TAP to toggle
MIDI Start/Stop messages. MIDI Start is a
system real time message instructing devices
to start playing a sequence. MIDI Stop tells
devices to stop playing the sequence.
Nudge
Hold the SHIFT button and use the BEAT joystick
to “Nudge” the outgoing MIDI beat clock BPM
up or down. MIDI beat clock is a system real
time message sent 24 times per quarter note.
BPM Adjust
Hold the SHIFT button and turn the TIME
encoder to adjust the BPM to a specic value.
Sync
Hold the SHIFT button and press SYNC to
turn Sync on for a Deck. If Sync is already
on, pressing Shift/Sync again re-syncs
the Deck. Press SHIFT and SYNC OFF to
turn Sync off. See Sync in the Serato DJ
manual.
Slip
Hold the SHIFT button and press SLIP to
toggle Slip On or Off. When Slip Mode is
active you can manipulate the audio as
normal (e.g., Scratch, Loop, Cues etc.).
However, once you have nished, playback
is returned to where it would be if you had
not manipulated the audio. See Slip in the
Serato DJ manual.
START / STOP
SHIFT
TAP
SHIFT
SHIFT
SYNC
SYNC OFF
SLIP
SHIFT
LOOP IN
ROLL OUT
SAVE LOOP