Operator`s manual

RANE SL3 FOR SERATO SCRATCH LIVE • OPERATOR’S MANUAL 2.5.0
39
RECORD BURN - This section of the
control vinyl has been worn. Swap sides
or use the track start offset.
LEFT CHANNEL MISSING - The signal
from the needle is not reaching the SL3.
Check the cable and cartridge wiring.
RIGHT CHANNEL MISSING - The signal
from the needle is not reaching the SL3.
Check the cable and cartridge wiring.
BAD RECORD BURN - Your record is
badly worn and Scratch Live is unable to
track. Swap sides or get new vinyl ASAP.
LEFT CHANNEL IS NOISE - Left
signal has been lost with a noisy loose
connection.
RIGHT CHANNEL IS NOISE - Right
signal has been lost with a noisy loose
connection.
TONEARM IS SLIGHTLY TOO LIGHT -
Susceptible to dust and vibration. Adjust
the tonearm.
SIGNALS ARE SUMMING TO MONO -
Left and right signals have been combined
into one somewhere in your signal chain.
RIGHT CHANNEL IS INTERFERENCE
Right signal is lost with a noisy loose
connection and left channel crosstalk.