Owner`s manual

OWNER’S MANUAL
7
SL3
Connecting the SL3
To integrate an SL3 unit into your setup, connect it to your turntables (or CD players) and mixer as follows:
1. Inputs
Connect your CD players or turntables to the Deck Inputs
on the Rane SL3. *If you use turntables, connect their
ground wires to the ground terminal on the SL3 or your
mixer.
*Optional Step: Connect an additional output (such as Aux
Out) from your mixer to the Aux Inputs on the SL3 to record
your set in Serato DJ.
*
RIGHT
DECK
2. Input Level Selection
Set each input to the correct input level using the dip
switches. Set the switches UP for Phono (turntables) or
DOWN for CD decks (line level).
DIP SWITCHES
3. Outputs
Connect the Outputs of the SL3 to Line inputs on your
mixer. You may need to set your mixer's input switch to CD
or LINE (n ot PHONO). Connect the AUX output to another
line input or Aux input on your mixer to output the sample
player or a third deck.
AUX
LEFT
DECK
RIGHT
DECK
4. Connect the SL3 to your computer
Using the provided USB cable, connect your SL3 to an
available USB 2.0 port on your computer. Make sure you
connect it directly to your computer and not through a hub
or splitter.