Operator`s manual

Manual-32
(Group B3) playback
To access this group, press the GROUP button on the mixer, then press B3. is group contains all the software functions required
for mixing in int mode. To select which of the Virtual Decks a given effect is applied to, press the mixer’s DECK button. e LED
next to the button indicates which of the Virtual Decks the software function applies.
Nudge forward or back.
Playback modes.
Play /
Pause.
Set temp
cue point.
Hold to play from
temp cue. Release
returns to temp cue.
Joystick up: Zoom
in the waveform.
Push (LED on) and
turn to quickly
shuttle through
the track.
Control looping
from the footswitch.
Joystick down:
Zoom out the
waveform.
Hold the joystick
up to play the
track backwards
momentarily then
release to jump
ahead with timing
intact.
Play the track
reverse from the
current position.
<< = Rewind.
>> = Fast forward.
(Group B2) library (custom group 2)
In this second custom group, many of the functions can be applied to either of the Virtual Decks. To select which of the Virtual
Decks a given effect is applied to, press the mixer’s DECK button. e LED next to the button indicates which of the Virtual Decks
the software function applies.
Scroll through your crates and library.
Push to load.
Hold the joystick
down and press
one of the B
buttons to set a
cue point.
< = previous loop.
> = next loop.
Jump to Cue points. Loop on / o
(toggle).
Joystick right to
‘Double’: Copy the
track from the left
Deck to the right
Deck.
Joystick right to
‘Double’: Copy the
track from the
right Deck to the
left Deck.
Control looping
from the footswitch.
Push to undo the
last action.
Hold the joystick
up to play the
track backwards
momentarily then
release to jump
ahead with timing
intact.