Operator`s manual

Manual-34
LFO Filter
ere are three filter types available: low-pass, band-pass and high-pass. Click anywhere on the filter effect window to cycle
between the three filter types. e diagram below details the LFO Filter controls.
e filter has these parameters:
• Filter cut-off frequency. Set by turning P1. • Filter resonance. Set by turning P2.
• LFO sweep rate. Set by tapping P1. • LFO modulation depth. Set by first pressing P2 (LED on) then turning P2.
Adjust the amount of
lter resonance.
Tap to set, and turn to adjust
the modulator BPM.
Tap left
Deck BPM.
Assign eect to: PGM 1. PGM 2. AUX BUS. MAIN.
Tap right
Deck BPM.
Cue
eect.
Eect
on / o.
Modulator BPM
multiplier.
Wet / Dry control.
– = more dry.
+ = more wet.
up = all wet.
down = all dry.
LP Filter Eect
Push (LED on) and
turn to adjust
modulator depth.
DECK
2
Adjust the amount of
echo feedback.
Tap to set the echo BPM.
Turn to adjust echo BPM.
Tap left
Deck BPM.
Assign eect to: PGM 1. PGM 2. AUX BUS. MAIN.
Tap right
Deck BPM.
Cue
eect.
Eect
on / o.
Echo BPM
multiplier.
Wet / Dry control.
– = more dry.
+ = more wet.
up = all wet.
down = all dry.
Echo Eect
DECK
1
(Group B6) effects
Echo
e TTM 57SL has two built in effects processors. Unlike other groups, when you are in the effects group, the DECK button on
the mixer switches between these two effects processors. DECK 1 activates the Echo controls, and DECK 2 activates the LFO Filter
controls. Each effect has parameters controlled by P1 and P2.
e left joystick, J1, sets the BPM (tempo) multiplier. Once you have set your BPM by tapping P1 or the footswitch, use the left
joystick to quickly halve, double or quadruple the tempo.
e buttons B1 through B4 set the effect’s insert point: either PGM, the Aux bus (which includes the Mic) or the Master output.
To listen to the effect in your headphones before engaging it, turn on cue by pressing B5. To turn on the effect, press B6.
ere are currently two effects available. More effects will be available for free download at www.scratchlive.net.
e diagram below details the Echo controls. See pages Manual 8-9 for details on the mixer effects controls.