Operator`s manual

Manual-38
Good Signal
Clean signal with 100% tracking.
No Signal
TTM 57SL is not receiving any control
signal — check your connections as
shown on page Manual-3.
CD Player into Phono Input
TTM 57SL is set to receive phono level
input. Set to the correct value on the
setup page.
Phono into Line Input
TTM 57SL is set to receive line level
input. Set to the correct value on the
setup page.
Unearthed
Very susceptible to interference. Attach
the turntable’s green (ground) wire.
Using Piggyback Cables
Picking up huge amounts of noise,
barely tracking. Connect your turntables
directly to the TTM 57SL.
Bad Turntable Vibration
Bass is reaching the stylus. Try to isolate
the turntable from the speakers.
Dusty Needle
Dust is preventing the stylus from track-
ing the groove correctly. Clean your
needle and the control vinyl.
Damaged Needle
Try re-seating, cleaning or replacing your
stylus.
Scope reading and fixes
Most of the problems that occur with Scratch LIVE can be attributed to it not getting a good reading of the control signal from your
records or CDs. ese examples show what the scopes on the setup screen can look like to help solve possible problems. Some prob-
lems cause similar looking scopes, e.g. if your scope looks like the Dusty Needle one, the cause could be a damaged needle.