Operator`s manual

Manual-40
TTM 57SL Specifications
Parameter Specification Conditions & Comments
Analog Inputs: 4 Stereo, Unbalanced RCA jacks:
..........Phono or line level input
..........Phono Response: RIAA ±1 dB, Gain: 30 dB at 1 kHz
..........Max input 133 mV
..........Input Impedance: 47.5k Ω, 200 pF
..........Line Gain: ±15 dB 1 kHz
..........Auxiliary Input: Stereo Unbalanced RCA jacks
..........Gain: O to +6 dB
FlexFX Return: Stereo Unbalanced ¼" TS (tip-sleeve) phone jack
FlexFX Send: Stereo Unbalanced ¼" TS phone jack
Mic Input: Active Balanced: ¼" TRS (tip-ring-sleeve) phone jack
..........Input Impedance: 511Ω, each leg to ground
..........Gain: 50 dB 1 kHz
..........Frequency Response: 30 to 20 kHz +0, -3 dB, max gain
..........CMMR: >40 dB 1 kHz, max gain
..........S/N: 76 dB Re 0 dBFS, max gain, 20 kHz BW
..........Tone Controls: 2-Band
Master/Booth Outputs: Stereo balanced XLR/TRS jacks
..........Frequency Response 15 Hz to 20 kHz +0, -3 dB
..........THD+N <0.005% re 0 dBFS, 20 to 20 kHz, 20 kHz BW
..........S/N (balanced output) 102 dB re 0 dBFS+4 dBu, A-weighted
Auxiliary Output: Stereo Unbalanced RCA jacks
General Specications:
..........Maximum Input (all inputs): 4Vrms
..........Maximum balanced output (main and booth): 8Vrms
..........Maximum unbalanced output (FlexFx and AUX): 4Vrms
..........Mixer digital audio: 24-bit, 44.1 kHz, 102 dB dynamic range
..........USB digital audio: 16-bit, 44.1 kHz, 102 dB dynamic range
..........Crosstalk: -75 dB re 0 dBFS, 1 kHz
Universal Power Supply: 100 to 240 VAC, 50 Hz to 60 Hz
USB Power: Mixer is self powered.
Note: All specifications are typical unless otherwise stated.