User manual

Version: 2.0
2
Key Features
y Complies with IEEE 802.11n wireless standards y Supports wireless data encryption with
64/128-bit WEP, WPA, WPA2, TKIP, AES
y 2.4GHz
frequency band, MIMO
y Supports QoS: WMM, WMM-PS
y Complies with USB 2.0 y Supports multiple BSSID
y High speed transfer data rate up to 150 Mbps
y Supports auto-installation
y Supports driver for Windows 2000, XP 32/64,
Vista 32/64, Windows 7, Linux (2.4.x/2.6.x), and
Mac (10.3.x/10.4.x/10.5.x/10.6.x) Power PC &
PC
Installation Guide
Software Installation
Note:
y For Linux or Mac driver installation guide, please refer to the instruction in
/Driver/Linux/README or /Driver/Mac/README in the CD-Rom.
y The screenshots will vary slightly depending on the version of Windows but the procedures
and screens are similar.
1. The system finds the newly installed device automatically. Click Cancel to close this window.
2. Insert the CD-Rom that came with this product to your CD-Rom drive. The menu window pops
up automatically. Please click the Driver button of this product.
Note: If the CD-Rom fails to auto-run, please click on My Computer > your CD-Rom drive
> (folder of this product) > Driver then double-click the Setup icon to start this menu.