User's Guide

3
2. Cooker Overview
The 60 gas cooker (Fig. 2.1) has the following features:
A. 4 hotplate burners
B. A control panel
C. A conventional top oven and grill
D. A main conventional oven
Hotplate Burners
The drawing by each of the knobs indicates which burner
that knob controls.
Each burner has a Flame Supervision Device (FSD) that
prevents the ow of gas if the ame goes out.
To ignite a hotplate burner push in and turn the associated
control knob counterclockwise to the high position as
indicated by the large ame symbol (

), (Fig. 2.2).
Sparks are generated as long as the control knob is held in.
If, when you let go of the control knob, the burner goes out,
then the FSD has not been bypassed. Turn the control knob
to the o (0) position and wait for one minute before you try
again, this time making sure to hold in the control knob for
slightly longer.
Adjust the ame height to suit by turning the knob counter-
clockwise (Fig. 2.3).
n
DO NOT operate the burners between the max (

)
and o (0) positions.
1 at shelf
2 at shelves
TOP OVEN
MAIN OVEN
C
B
D
A
Shelf Position 2
Shelf Position 4
Shelf Position 1
Shelf Position 3
Shelf Position 2
Shelf Position 4
Shelf Position 5
Shelf Position 3
Shelf Position 1
DocNo.020-0002 - Overview - 90 Ceramic - Generic
Fig. 2.1
Fig. 2.2
Fig. 2.3