User guide

INSTALLATION
Check the appliance is electrically safe and gas sound when you have nished.
21
Checking the Parts:
Location of Cooker
The cooker may be installed in a kitchen/kitchen diner but
NOT in a room containing a bath or shower.
This appliance is designed for domestic cooking only. Use
for any other purpose could invalidate any warranty or
liability claim.
Note: An appliance for use on LPG must not be installed
in a room or internal space below ground level, e.g. in a
basement.
You will need the following equipment to complete
the cooker installation satisfactorily:
• Stability bracket: If the cooker is to be supplied with
gas through a flexible hose, a stability bracket or chain
MUST be fitted.
These are not supplied with the cooker but are
available at most builders’ merchants.
• Gas pressure tester/manometer.
• Flexible gas hose: Must be in accordance with the
relevant standards.
• Multimeter: For electrical checks.
You will also need the following tools:
1. Electric drill
2. Masonry drill bit (only required if tting the cooker on a
stone or concrete oor)
3. Wall plugs (only required if tting the cooker on a stone
or concrete oor)
4. Steel tape measure
5. Cross head screwdriver
6. Flat head screwdriver
7. Spirit level
8. Pencil
9. Adjustable spanner
10. Allen keys (for Classic – supplied)
11. Screws for tting stability bracket
12. 13 mm spanner (or socket wrench)
3 pan supports Splashback (Classic only)
ArtNo.000-0001 90 Pan supports
ArtNo.421-0002 - Splashback
Griddle Grill pan & trivet
ArtNo.330-0002 - Grill pan w handle
2 at shelves Handyrack
ArtNo.324-0003 Handyrack
Roasting tin
Tall oven shelves and shelf
supports
ArtNo.324-0004 Roasting tin
ArtNo.000-0010 Tall oven shelves
Handles (Classic only) Plinth
ArtNo.210-0014 - Classic handles