GLX490 RM GALAXY HOOD GLASS Instructions Manual www.rangemaster.co.
Instructions Manual INDEX RECOMMENDATIONS AND SUGGESTIONS ..................................................................................................................... 3 CHARACTERISTICS ............................................................................................................................................................. 4 INSTALLATION..................................................................................................................................................
RECOMMENDATIONS AND SUGGESTIONS The Instructions for Use apply to several versions of this appliance. Accordingly, you may find descriptions of individual features that do not apply to your specific appliance. INSTALLATION • The manufacturer will not be held liable for any damages resulting from incorrect or improper installation. • Check that the mains voltage corresponds to that indicated on the rating plate fixed to the inside of the hood.
CHARACTERISTICS Dimensions EN 4 4
Components Q.ty Product components 1 Cooker hood with control unit, lights, blower unit, filters 2.1 1 Upper chimney 2.2 1 Lower chimney 8 1 Air outlet grid 9 1 Reducer flange Ø 150-120 10 1 Adapting ring ø 120-125 mm 14.1 2 Air Outlet Connection Extension 15 1 Air Outlet Connection 16 1 Cover for recycling version Ref. Q.ty Installation components 7.2.1 2 Fixing brackets for upper chimney 7.
INSTALLATION Hood body mounting L A • Firstly, it is necessary to adjust the two Vr-screws of the 11a-brackets, at minimun (B). • Hang the hood body on the two brackets 11a. • Connect the hood to the mains supply by means of a bipolar switch with at least 3 mm contact gap. • Press the “A”-key for one second (see Part USE) to open the upper panel. • Remove the metal filters. • In order to align the hood it is necessary to adjust the Vr-screws from inside the hood. • Fasten the safety screw 11.
RECYCLING VERSION AIR OUTLET To install the hood in recycling version, the optional charcoal filter kit must be purchased. 8 • Insert the connection extension pieces laterally 14.1 in connection 15. • Insert the Connector 15 into the Support bracket 7.3 and fix it with a screw. • Make sure that the outlet of the extension pieces 14.1 is horizontally and vertically aligned with the chimney outlets.
Flue assembly Upper exhaust flue • Slightly widen the two sides of the upper flue and hook them behind the brackets 7.2.1, making sure that they are well seated. • Secure the sides to the brackets using the 4 screws 12c (2,9 x 9,5) supplied. • Make sure that the outlet of the extensions pieces is aligned with the chimney outlets. 12c 2.1 2 2.2 12c 12c Lower exhaust flue • Slightly widen the two sides of the flue and hook them between the upper flue and the wall, making sure that they are well seated.
USE Control panel A B C D E Key Function A Upper panel closed: when pressed for about one second it opens the upper panel. It switches the motor on at the latest selected speed. Upper panel open: when shortly pressed it switches the motor on/off. B Decreases the suction speed. C Increases the suction speed. D Functioning only when the upper panel is open. This speed has been timed at 10 minutes. After that time the system activates automatically the latest selected speed.
REMOTE CONTROL (OPTIONAL) The appliance can be controlled using a remote control powered by a 1.5 V carbon-zinc alkaline batteries of the standard LR03-AAA type. • Do not place the remote control near to heat sources. • Used batteries must be disposed of in the proper manner. Remote control (control panel) T1 T2 T3 T4 T5 T6 T7 T1 Lighting Upper panel closed: opens the upper panel and sets the lights at the maximum intensity. Upper panel open: switches the lights on/off.
MAINTENANCE Metal grease filters Filters can be washed in the dish machine. They need to be washed when Drop-sign appears on the display or in any case every 2 months, or even more frequently in case of particularly intensive use of the hood. Alarm reset • Press the G–key for at least 2 seconds. Cleaning the filters • Open the upper panel by pressing the A-key for 1 second (see Part USE).
Charcoal filter (recycling version) This filter cannot be washed or regenerated. It must be replaced when the C appears on the display or at least once every 4 months. The filter saturation alarm has to be activated already before. Activation of the alarm signal • In the recycling version hoods the filter saturation alarm must be activated during the installation or later. • Switch off the hood and the lights.
Replacing the fuser The hood panel opening and closing mechanism is controlled by a starter motor which is activated by a fuser. This fuser works only on the starter motor. In case the fuser gets damaged when the panel is closed it is be necessary to manually unblock the panel. In this case proceed as follows: • Remove the cover placed up on the left side. • Press the releasing lever with the screwdriver as much as necessary to enable the manual opening of the panel.
AGA RANGEMASTER LTD.