RI77 Induction Hob User Guide & Installation & Service Instructions U109919 - 03
Contents Before You Start...
1. Before You Start... Thank you for buying a Rangemaster hob. It should give you many years trouble-free cooking if installed and operated correctly. It is important that you read this section before you start, particularly if you have not used an induction hob before. This appliance is designed for domestic cooking only. Using it for any other purpose could invalidate any warranty or liability claim. Installation and Maintenance In the UK, the electrical installation should be in accordance with BS 7671.
Hob Care Cleaning DO NOT use the hob surface as a cutting board. The ceramic surface should be washed after use in order to prevent it from becoming scratched or dirty. DO NOT leave utensils, foodstuffs or combustible items on the hob when it is not is use (e.g. tea towels, frying pans containing oil). In the interests of hygiene and safety, the hob should be kept clean at all times as a build up of fats and other foodstuffs could result in a fire.
2. Hob Overview DocNo.023-0002 - Overview - RI77 hob Fig.2-1 �������������������������� �������������������������� INDUCTION ArtNo.314-0004 RI77 labelled �������������������������� �������������������������� ELECTRONIC CONTROL ����������������������������� The induction hob comprises of four cooking zones containing induction elements with different ratings and diameters (Fig.2-1), each with a pan detector and residual heat indicator.
Fig.2-5 � � � � � � 1. 2. 3. 4. Power ON/Power OFF Cooking zone + Cooking zone – Digital display � 5. Zone selection indicator 6. Timer control ArtNo.317-0001 60 Touch controls common 7.ELECTRONIC Timer display CONTROL 8. TImer indicator lights (4 off) � Pan Detector, If a cooking area is switched on and there is no pan in place or if the pan is too small for the cooking area, then no heat will be generated. The symbol [ ] will appear on the hob control display; this is the “pan-missing symbol”.
Note: The ‘+’ keys have a repeat function: holding the key pressed down will increase the power setting by one level every 0.3 seconds. Fig.2-9 To reduce the power to a cooking zone select the required zone, as indicated by the red dot in the display. Press the ‘–‘ key to reduce the power required (Fig.2-8). Note: The ‘–’ key has a repeat function: holding the key pressed down will reduce the power setting by one level every 0.3 seconds. ArtNo.
Timer Function Fig.2-15 The timer has two settings: ArtNo.317-0007 60 Setting the zone timer • Zone timer • Minute timer Zone Timer This allows each cooking zone to be set to cook up to a maximum of 99 minutes at a set power level. At the end of the cooking time the zone will turn off automatically. Activating the timer: Select the required cooking zone and then: Fig.2-16 1. Using the ‘+’ and ‘–‘ keys, set the desired cooking temperature. 2. Press the timer key (Fig.
Turning off the timer alarm: At the end of the cooking time the hob will beep steadily for 2 minutes. Press any key to stop the alarm. Fig.2-19 Deactivating the timer: Make sure that none of the cooking zones has been selected. Press the timer and ‘–‘ keys simultaneously. The timer display will go out. ArtNo.317-0007 60 Setting the zone timer ������������������ ����������������� Child Lock Function This allows the control panel to be locked to prevent any accidental use. Fig.
3. Cleaning Your Hob DocNo.043-0001 - Cleaning - BI hob induction Essential Information Cleaning Burned-on Spills Allow the hob to cool and isolate the electricity supply before carrying out any thorough cleaning. Make sure that the residual heat indicators are off and that the hob is cool. Remove the excess burned-on substance with a single-edged razor scraper. Hold the scraper at an angle of about 30° to the surface and then scrape off the burned-on matter (Fig.3-1).
4. Troubleshooting DocNo.053-0001 - Troubleshooting - BI hob induction If there is an installation problem and I don’t get my original installer to come back to fix it, who pays? You do. Service organisations will charge for their callouts if they are correcting work carried out by your original installer. Therefore, it’s in your own interest to keep track of this installer so that you can contact them as required. A crack has appeared in the hob surface.
INSTALLATION Check the appliance is electrically safe when you have finished. Installation Dear Installer Location of the Hob Before you start your installation, please complete the details BELOW. The hob may be installed in a kitchen/kitchen diner but NOT in a room containing a bath or shower. This appliance is designed for domestic cooking only. Use for any other purpose could invalidate any warranty or liability claim.
INSTALLATION Check the appliance is electrically safe when you have finished. Positioning the Hob The hob should be fitted into a work surface, which is at least 600mm deep. In position, the hob has a maximum thickness of 5mm from the top of the work surface, and an overall thickness of 45mm (65mm max depth including the connection block). The cut-out dimensions are shown in (Fig.5-1), and the minimum clearances in (Fig.5-2). ������ ��� Fig.
INSTALLATION Check the appliance is electrically safe when you have finished. Fig.5-4 Secure the hob to the worktop using the brackets supplied. The positioning of the bracket (and sleeve) is dependent on the thickness of the worktop as shown in (Fig.5-4). ��� ������� ����� Note: Slide the optional sleeve onto the bracket if fitting to thin work surfaces. Locate the bracket to the slot on the hob base and then tighten the retaining screw until it is locked to the worktop.
6. Circuit Diagram ���� �� �� �� �� �� �� �� �� �� �� �� �� ��� ��� �� ��� ��� ��� �� �� �� �� ��� ��� ��� � � � � �� �� ��� � � �� ��� ��� ��� �� ��� ��� ��� �� �� � � ArtNo.080-0014 RI60-RI77 circuit diagram �� � � ��� ��� ��� �� �� ��� ��� ��� �� � � �� �� �� �� � �� ���� ��� ����� ��� ����� ��� ������ �� ��� �� ������ ArtNo.050-0015 - Wiring colour �� ����� code table �� ������ ���� ������������ ��� ���� ��� � ArtNo.
DocNo.103-0002 - Technical data - RI77 hob 7. Technical Data INSTALLER: Please leave these instructions with the user. DATA BADGE LOCATION: Base of the hob.
8. Warranty/After Sales Service If consultation or technical assistance is needed, please provide the local authorised service agent with the purchase invoice and the product code/serial number. The 2 years free maintenance for the operation of the appliance started from the date of purchase of this product. Any cosmetic damage to the appliance must be reported within 90 days of delivery. For in-warranty service please call: 0845 6035312. For general enquiries please call: 0870 7895107. 15 DocNo.
16
17
DocNo.000-0001 - Back cover Rangemaster ���������������������������������������� ArtNo.000-0003 CE logo www.rangemaster.co.
