Extractor Hood Instructions Manual

Grease filters

CLEANING METAL SELF- SUPPORTING GREASE FIL-

TERS

Alarm signal reset

• Switch off the lights and extractor motor.

• Press button T3 for at least 3 seconds, until the leds

start to flash.

Cleaning the filters

• The filters are washable and must be cleaned at least

every 2 months of operation, or more frequently for

particularly heavy usage.

• Pull the Comfort Panel to open it.

• Remove the filters one at a time by pushing them to-

wards the back of the group and pulling down at the

same time.

• Wash the filters, taking care not to bend them. Allow

them to dry before refitting.

• When refitting the filters, make sure that the handle

is visible on the outside.

ATTENTION: Remove the filters one by one pushing

them towards the back side of the hood and simultane-

ously pulling downwards and towards the centre of the

hood (only in case of 60 cm hood version).