User's Manual

Page 19
1. Rotary encoder
Move clockwise or counterclockwise to change the selection
according to the mode programmed for this encoder.
2. Power switch and Volume control
Turn clockwise to switch ON the transceiver. Rotate to adjust
the volume. Turn fully counterclockwise to switch OFF the
transceiver
3. Transmit/ Busy/ Low Bat and message alert
Lights red during transmission
Green while receiving a call
Blinks on red to show low battery status
Blink on orange when any unread incoming message
4. Top Side Key
Press to activate its programmable function. The function
assigned to this key is designed by your dealer.
5. PTT (Push-to-Talk) switch
Press this switch, and then speak into the microphone to call
a station.
6. Bottom Side Key
Press to activate its programmable function. The function
assigned to this key is designed by your dealer.
7. Emergency/Top Key
Press to activate its programmable function. The function
assigned to this key is designed by your dealer.
8. Function Keys
Press to activate its programmable function. The function
assigned to this key is designed by your dealer.