User's Manual

Page 39
the average of the last two minutes of current demand. It is played back
when you press a programmed button to check battery level.
Announce  GPS: it announces the status of the GPS (ON or OFF). It is
played back when you press a programmed button to change GPS status.
Announce  Power: It announces the current transmit power (High,
Med, Low or Auto). It is played back when you press a programmed
button to adjust the transmit power.
Announce  RSSI: It announces the current RSSI level when receiving an
analog carrier or an FDMA carrier. It is played back when you press a
programmed button to check the RSSI.
Announce  IDs: It announces the caller ID at the front of an incoming
private call (Only on trunking mode).
Announce  Channel: It announces the current channel number on
current bank. It is played back only when you change the channel.
MENU  GPS
GPS: Lets you to adjust current GPS status (on/off), shows the status of
the GPS receiver and the current position if fixed.
GPS  Status: Shows on display the quantities of satellites used to fix. In
case of not fixed yet, it will show NOT FIXED or GPS Disabled. To exit this
screen press [MENU] or [BACK] to jump to GPS Menu root.
GPS
Status
Position
Enabled