User's Manual

SDRe Programming Software
Revision V1.0
P a g e | 17
ESN shows the Electronic Serial Number of the attached device. It is
unique number who identifies the repeater.
Last Prog Shows the date and the time of the last time the attached
repeater has been programmed.
RTC Shows the current date and time of the Real Time Clock of the
attached repeater.
2.1.7. Software Version
This area displays the current software version you are using to
program SDR repeaters.
2.2. Software configuration
Before initial use, it is required to adjust the software as per your
environment.
Figure 9: SDR Programming Software Configuration Access