User's Manual

SDRe Programming Software
Revision V1.0
P a g e | 18
As soon as you click on [Configuration], the right configuration
screen pops up.
Figure 10: SDRe Programming Software Configuration Screen
2.2.1. Repeater link to the computer:
You can choose to connect your radios to the computer by USB
(default) or TCP/IP media protocol.
In case of USB media connection to the radio, it should be required
to install the drivers for your USB device.
As soon as you plug a SDR repeater to the computer through the
USB port, you will be prompted to install the driver. Installation
software already copy the files into the selected directory you have
introduced into the installation time, under {Drivers} folder: For
example:
C:\Program Files (x86)\SmarTrunk\SDRe_Programmer\Driver
Once you complete driver installation, the connection to the
repeater will be done automatically. The drivers must be installed
only once.
As SDR repeater is not a standard device included into MW Windows library, you must install the
drivers before read or write a radio.
Note: 3 - Driver installation alert for USB Media Connection