User's Manual

SDRe Programming Software
Revision V1.0
P a g e | 26
released immediately and the other is that function to be executed
when the button is pressed by long time.
Long Press timer is the minimum time in milliseconds [ms] that a
key must be held to be considered as Press and Hold action.
This parameter can be adjusted form 100msec up to 2500 msec.
Please define it as per your convenience.
4.2.2. Buttons Actions:
The Buttons Definition Screen lets you to assign different functions
to repeater buttons.
Click on the side arrow to open the selection list of possible functions
to be assigned to any of the buttons, and then click on the desired
function to be assigned.
Figure 21: Assigning the function to a button
To finish the function assignment, press [Ok] to return to the main
dashboard.
Press And Hold means a long push function assigned to such button.