User's Manual

SDRe Programming Software
Revision V1.0
P a g e | 62
Figure 73: Roaming Service Activation for Digital Profiles
To store this option, click on any part of the tab. To save the value,
press [Ok] or Cancel if you want to discard the changes.
4.6.2.7. Hybrid Mode
SDR protocol supports analog and digital modulations on the same
channel. Check this box if you want to allow the repeater to support
analog and digital radios over the same channel.
Figure 74: Hybrid mode activation
To store this option, click on any part of the tab. To save the value,
press [Ok] or Cancel if you want to discard the changes.
4.6.2.8. Setup the repeater tail
Fill this field with the desired repeater tail length. 0 second means
no tail. Max value is 255 seconds.
Figure 75: Repeater tail setup for Digital Profiles
To store the value, click on any part of the tab. To save the value,
press [Ok] or Cancel if you want to discard the changes.