Installation Manual

Stage 2
Formatting and partitioning the Disk
How you would normally initialize, format and partition a disk, you will be able to perform the
same with‘Clean’USB drive. You can do this is in diskpart command itself, but it is much easier
with Disk Management Tool.
Launch the Disk Management Tool, right click Windows icon and select ‘Disk Management’ in
Windows 10 and 8. If it is Windows 7, open Run dialog box by pressing ‘Windows + R’ keys and
type ‘diskmgmt.msc’ into the box and press Enter.
You can see the USB drive without partition. To create a partition and to format the disk with a
file system, right-click on the ‘Unallocated’ space and choose ‘New Simple Volume’.
Conclusion
Now, if you have followed the right steps I cleaning and formatting the disk, your USB drive
should show the full capacity and function properly. If it’s not working – like, you are trying to
clean the disk and diskpart doesn’t recognize it, or unable to partition the drive, then the USB
drive is physically damaged and cannot be used to its full capacity.
Then
Please contact us via:
Email: [e-mail]
Amazon: https://tinyurl.com/messageRAOYI
We will make proper handling during the warranty period.