Owner's Manual

Description: 2 conductors 24 AWG stranded bare copper, polypropylene insulated,
overall serve shielded, PVC jacketed microphone cable
VTG Part Number: MIC1
1. Conductor
1.1 AWG Size and Stranding: 24 AWG 16 strands 36 AWG
1.2 Material: Bare annealed copper
2. Insulation
2.1 Material: Polypropylene
2.2 Wall Thickness: .013" nominal
2.3 Diameter: .050" +/- .002"
3. Color Code
3.1 Code: Blue paired with red
4. Assembly
4.1 Lay Length: 1 3/4" maximum left hand
4.2 Fillers: Jute as required
5. Shield
5.1 Material: Bare annealed copper serve
5.2 Coverage: 95% nominal
6. Jacket
6.1 Material: Matte finish polyvinyl chloride, color as specified
6.2 Colors: Black, blue, green, purple, red white, and neon blue, green, orange,
pink and yellow
6.3 Wall Thickness: .055" nominal
6.4 Diameter: .230 +/- .005"
7. Markings
7.1 Type: Surface printing in white ink(blue on white jacket)
7.2 Legend: VTG AUDIO LOW NOISE – BALANCED MICROPHONE
CABLE, MADE IN USA
VTG AUDIO NEON BRITES BALANCED CABLE MADE IN USA
8. Electrical Specifications
8.1 Capacitance Between Conductors: 21 pF/ft @ 1 kHz
8.2 Capacitance Conductor to Shield: 37 pF/ft @ 1 kHz
8.3 Characteristic Impedance: 70 ohms @ 1 MHz
8.4 Resistance at 20C: 23 ohms/1000 ft.
Dr. No.: 0712A-01
By: TRM
Date: 09/02/97
Page 1 of 1