ECONOMY CUT-TO-LENGTH WITH BATCH Count OPERATING INSTRUCTIONS RAPID-AIR CORPORATION 4601 KISHWAUKEE ST. • ROCKFORD, IL 61109-2925 Phone: (815) 397-2578 • Fax: (815) 398-3887 • Web Site: www.rapidair.
ECONOMY CUT TO LENGTH WITH BATCH CONTROL The Cut-To-Length Control when coupled with a Rapid-Air feed and cutter assembly can be put into production with a minimum of adjustments. The control is completely self contained and requires only 2 interface points, which are provided on the outside of the electrical enclosure. 1. A cable connection that should be connected to the solenoid of the air feed. 2. A cable connection that should be connected to the solenoid of the cutter.
while still being able to cut through the material. Transversely, if a job is being run and the cutter is getting dull, the potentiometer can be adjusted to slow the cutter down to get the job finished before changing or sharpening the cutter blades. 6. FEED RATE POTENTIOMETER: The feed rate potentiometer is a single-turn potentiometer. By turning the knob clockwise the cycle time will be shortened causing more strokes per minute.
Warranty ALL SALES BY THE COMPANY ARE MADE SUBJECT TO THE FOLLOWING TERMS AND CONDITIONS. PLEASE READ. WARRANTY - The Company warrants, for a period of one year from date of shipment by the Company, that the product shipped is free from defects in material and workmanship. THIS WARRANTY IS EXCLUSING AND IN LIEU OF ALL IMPLIED WARRANTIES IN LAW, INCLUDING MERCHANT - ABILITY. The Company obligation under this warranty is limited to repairing or replacing, F.O.B.
