Instructions / Assembly

1
PRODUCT DATASHEET
DESCRIPTION: Rapid Set
®
CONCRETE LEVELER
®
PRIMER (CLP) is a ready-to-use acrylic
primer that improves the adhesion of Rapid Set
®
Concrete Leveler
®
to prepared concrete.
CLP acts to prevent pinholes and bubbles from forming in the nished surface.
SURFACE PREPARATION: CLP is intended for use on prepared concrete. Surface must be
dry, porous, clean, sound, and free of oil, curing compounds, dust, mastic and other bond
breakers. Mechanically prole the surface by shot blasting or grinding. Acid etching the
concrete surface is not recommended.
MIXING & APPLICATION: Shake well to ensure primer is thoroughly mixed and there is
no sediment in the container bottom. Mix at low speed with a drill and paint mixer. Apply
primer to substrate and work into the concrete surface with a soft-bristle push broom.
Paint roller or spray application will not achieve sufcient coverage. Spread evenly to
avoid puddles and to thoroughly coat the surface. Maintain material, surface and ambient
temperatures above 50°F (10°C).
For excessively porous or absorbent concrete surfaces, multiple coats may be necessary.
Prime the surface with an initial application of diluted primer at a ratio of 1 part water to
1 part primer. Allow to dry and become tack free. Then, apply a second coat of undiluted
primer. Repeat as necessary until the nal coat of primer stays wet for at least 20 minutes.
Lower temperatures and/or higher humidity will extend drying time.
Apply CLP after the primer is dry and within 24 hours of the nal primer coat. If more than
24 hours have elapsed, reapply primer.
COVERAGE & PACKAGING: CLP is available in 1 quart and 1 gallon bottles. Coverage
is about 50 ft
2
to 100 ft
2
(4.6 m
2
to 9.3 m
2
) per quart or 200 ft
2
to 400 ft
2
(18.6 m
2
to
37.2 m
2
) per gallon.
SHELF LIFE: CLP has a shelf life of 2 years from date of manufacture if kept in a cool
environment, out of direct sunlight. Do not allow material to freeze.
USER RESPONSIBILITY: Before using CTS products, read current technical data sheets,
bulletins, product labels and safety data sheets at www.CTScement.com. It is the user’s
responsibility to review instructions and warnings for any CTS products prior to use.
Primer is not for use in wet environments or on substrates that have a Moisture Vapor
Emission Rate greater than 5 lbs. per 1000 sq. ft. in 24 hours or relative humidity greater
than 79%.
WARNING: AVOID CONTACT WITH EYES AND SKIN. Close container after each use.
Do not reuse container. Dispose of container and primer residue in accordance with
federal, state and local waste disposal regulations. Do not ush primer down drains,
sewers or waterways. Carefully read and follow all cautions and warnings on product
label. For complete safety information, please refer to product SDS available at
www.CTScement.com. If material comes in contact with eyes, ush with cool, clean
water for 15 minutes with eyes open. If irritation persists, consult a physician. If material
comes in contact with skin, wash thoroughly with soap and water. If irritation persists,
consult a physician. Always use in a well-ventilated area. Avoid inhalation. KEEP OUT OF
REACH OF CHILDREN. CLP is non-toxic, non-explosive and non-ammable.
CONCRETE LEVELER
®
PRIMER
High-Adhesion Acrylic Primer
OVERVIEW
Highlights:
Improves adhesion
Seals porous concrete to prevent pinholes
and bubbles
Ready to use
MasterFormat
®
2016
03 05 00
Concrete Bonding Agents,
Admixtures and Adhesives
Manufacturer:
CTS Cement Manufacturing Corp.
12442 Knott St.
Garden Grove, CA 92841
Tel: [phone] | Fax: [phone]
Web: www.CTScement.com
E-mail: [e-mail]
FLOORINGPRODUCT CATALOG