SDS
Rapid Set Non Sag Sealant (Light Gray) SDS US
Version #: 01 Revision date: 16 February 2017 | Issue date: 8 February 2017 Page 3 of 9
General information
If you feel unwell, seek medical advice (show the label where possible). Ensure that
medical personnel are aware of the material(s) involved, and take precautions to
protect themselves. Show this safety data sheet to the doctor in attendance.
5 FIRE-FIGHTING MEASURES
Suitable extinguishing media
Water, carbon dioxide, dry chemical, foam.
Unsuitable extinguishing
media
Not determined.
Specific hazards arising from
the chemical
Thermal decomposition products include carbon monoxide, carbon dioxide, nitrogen
oxides, aldehydes, and various polymer compounds. Hydrolysis will produce small
amounts of methanol.
Special protective equipment
None. Full emergency equipment with self-contained breathing apparatus and full
protective clothing should be worn by firefighters.
Firefighting
equipment/instructions
Full emergency equipment with self-contained breathing apparatus and full
protective clothing should be worn by firefighters.
Specific methods
Use above mentioned firefighting procedures and consider the hazards of other
involved materials. The degree of risk is governed by the burning substance and the
fire conditions. Do not allow runoff from firefighting to enter drains or water
courses. Collect contaminated fire extinguisher water separately. Fire residues and
contaminated fire extinguisher water must be disposed of in accordance with local
regulations.
General fire hazards
Thermal decomposition products include carbon monoxide, carbon dioxide, nitrogen
oxides, aldehydes, and various polymer compounds. Hydrolysis will produce small
amounts of methanol.
6 ACCIDENTAL RELEASE MEASURES
Personal precautions,
protective equipment and
emergency procedures
Use personal protection recommended in Section 8. Avoid eye, skin and clothing
contact.
Methods and materials for
containment and cleaning up
Collect spill with absorbent material such as cardboard, allow to cure and place into
a container approved for waste disposal.
Environmental precautions
Follow applicable OSHA regulations (29 CFR 1910.120).