Use and Care Manual

Alcohol

Prep Pad

User

Manual

Universal Magnetic Car Mount

USER GUIDE

REMOVAL INSTRUCTIONS

1. Apply 3 or 4 drops of rubbing

alcohol between the surface

and the mount base, wait a

minute or 2 for the adhesive

to soften.

2. Carefully use dental oss or

shing line, in a sawing motion

to cut through the foam.

3. Use nger to roll away

remaining adhesive.

Caution: Do not use sharp tools

to remove or cut through foam

as it may damage the surface or

device.

For additional information,

visit www.rapidx.io or

email support@rapidx.io

PACKAGE INCLUDES

1. Magnetic car mount x1

2. Steel ball mount x1

3. Large magnetic disks x1

4. Small magnetic disks x2

5. Rectangle magnetic plate x1

6. Alcohol wipe x1

7. Extra 3M adhesive for steel

ball mount x3

8. Extra 3M adhesive for

magnetic disks x3

9. User manual x1

8 9

PAGE 1
REMOVAL INSTRUCTIONS PACKAGE INCLUDES 1. Apply 3 or 4 drops of rubbing alcohol between the surface and the mount base, wait a minute or 2 for the adhesive to soften. 1. Magnetic car mount x1 2. Carefully use dental floss or fishing line, in a sawing motion to cut through the foam. 5. Rectangle magnetic plate x1 2. Steel ball mount x1 3. Large magnetic disks x1 Universal Magnetic Car Mount USER GUIDE 4. Small magnetic disks x2 6. Alcohol wipe x1 3. Use finger to roll away remaining adhesive. 7.
PAGE 2
1 Install the Steel Ball Mount 1. Choose a flat smooth surface on your car dashboard or other flat surface (in your home, office, garage, anywhere). 2 Install the Magnetic Disk Dashio Magnetic Disks can be installed on the outside of your smart device case, inside the case or directly on the smart device. 2. Clean the chosen area with the alcohol pad (included). Allow to fully dry before installing the steel ball mount. 3.