Product Info

ManualsBrandsRapsodo ManualsElectronicsRapsodo 2.4/5GHz Wifi Module

PAK Technology Inc. www.ampak.com.tw

Proprietary & Confidential Information

Doc. NO:

Rapsodo 2.4/5GHz Wifi Module

Rapsodo

Model:RAP-6356S

Summary of content (36 pages)

PAGE 1
Rapsodo Rapsodo 2.4/5GHz Wifi Module Model:RAP-6356S AMPAK Technology Inc. Doc. NO: www.ampak.com.
PAGE 2
Revision History Date 2014/07/25 Revision Content -Preliminary AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Revised By Version Brian 1.
PAGE 3
AP6356 Datasheet Contents Contents ................................................................................................................... 2 1. Introduction......................................................................................................... 4 2. Features............................................................................................................... 5 3. Deliverables ..............................................................................................
PAGE 4
AP6356 Datasheet 12.2 Dimension................................................................................................... 31 12.3 MSL Level / Storage Condition ................................................................... 33 AMPAK Technology Inc. Doc. NO: www.ampak.com.
PAGE 5
AP6356 Datasheet 1. Introduction AMPAK Technology would like to announce a low-cost and low-power consumption module which has all of the WiFi and Bluetooth functionalities. The highly integrated module makes the possibilities of web browsing, VoIP, Bluetooth headsets applications. With seamless roaming capabilities and advanced security, also could interact with different vendors’ 802.11a/b/g/n/ac 2x2 Access Points in the wireless LAN. The wireless module complies with IEEE 802.
PAGE 6
AP6356 Datasheet 2. Features           Lead Free design which is compliant with ROHS requirements. 802.11a/b/g/n/ac dual-band radio with virtual-simultaneous dual-band operation Dual-stream spatial multiplexing up to 867 Mbps data rate. Supports 20, 40, 80 MHz channels with optional SGI(256 QAM modulation) Supports IEEE 802.11 ac/n beam forming. Supports IEEE 802.15.
PAGE 7
AP6356 Datasheet 3. Deliverables 3.1 Deliverables The following products and software will be part of the product.  Module with packaging  Evaluation Kits  Software utility for integration, performance test.  Product Datasheet.  Agency certified pre-tested report with the adapter board. AMPAK Technology Inc. Doc. NO: www.ampak.com.
PAGE 8
AP6356 Datasheet 4. General Specification 4.1 General Specification Model Name AP6356 Product Description Support WiFi/Bluetooth functionalities Dimension L x W x H: 15 x 13 x 1.5 (typical) mm WiFi Interface Support SDIO/PCIe BT Interface UART / PCM Operating temperature -10°C to 65°C Storage temperature -40°C to 85°C Humidity Operating Humidity 10% to 95% Non-Condensing 4.2 Voltages 4.2.1 Absolute Maximum Ratings Symbol VBAT VDDIO Description Min. Max. Unit Input supply Voltage -0.
PAGE 9
AP6356 Datasheet 5. WiFi RF Specification 5.1 2.4GHz RF Specification Conditions : VBAT=3.6V ; VDDIO=3.3V ; Temp:25°C Feature Description WLAN Standard IEEE 802.11a/b/g/n/ac WiFi compliant Frequency Range 2.400 GHz ~ 2.497 GHz (2.4 GHz ISM Band) Number of Channels 2.4GHz：Ch1 ~ Ch14 Modulation 802.11b : DQPSK, DBPSK, CCK 802.11 g/n : OFDM /64-QAM,16-QAM, QPSK, BPSK 802.11b /11Mbps : 16 dBm ± 1.5 dB @ EVM  -9dB 802.11g /54Mbps : 15 dBm ± 1.5 dB @ EVM  -25dB Output Power 802.
PAGE 10
AP6356 Datasheet SISO Receive Sensitivity (11n,20MHz) @10% PER MIMO Receive Sensitivity (11n,20MHz) @10% PER SISO Receive Sensitivity (11n,40MHz) @10% PER MIMO Receive Sensitivity (11n,40MHz) @10% PER SISO Receive AMPAK Technology Inc. Doc.
PAGE 11
AP6356 Datasheet Sensitivity (11ac,20MHz) @10% PER MIMO Receive Sensitivity (11ac,20MHz) @10% PER SISO Receive Sensitivity (11ac,40MHz) @10% PER MIMO Receive Sensitivity (11ac,40MHz) @10% PER AMPAK Technology Inc. Doc.
PAGE 12
AP6356 Datasheet - MCS=8, NSS1 PER @ -68 dBm, typical - MCS=9, NSS1 PER @ -66 dBm, typical - MCS=0, NSS2 PER @ -87 dBm, typical - MCS=9, NSS2 PER @ -62 dBm, typical 802.11b : -10 dBm Maximum Input Level 802.11g/n : -20 dBm Antenna Reference Small antennas with 0~2 dBi peak gain 5.2 5GHz RF Specification Conditions : VBAT=3.6V ; VDDIO=3.3V ; Temp:25°C Feature Description WLAN Standard IEEE 802.11a/n 2x2, WiFi compliant Frequency Range 4.900 GHz ~ 5.845 GHz (5.
PAGE 13
AP6356 Datasheet MIMO Receive Sensitivity (11a,20MHz) @10% PER SISO Receive Sensitivity (11n,20MHz) @10% PER MIMO Receive Sensitivity (11n,20MHz) @10% PER SISO Receive Sensitivity (11n,40MHz) @10% PER MIMO Receive Sensitivity (11n,40MHz) @10% PER AMPAK Technology Inc. Doc.
PAGE 14
AP6356 Datasheet SISO Receive Sensitivity (11ac,20MHz) @10% PER MIMO Receive Sensitivity (11ac,20MHz) @10% PER SISO Receive Sensitivity (11ac,40MHz) @10% PER AMPAK Technology Inc. Doc.
PAGE 15
AP6356 Datasheet - MCS=0, NSS1 PER @ -88 dBm, typical - MCS=1, NSS1 PER @ -86 dBm, typical - MCS=2, NSS1 PER @ -84 dBm, typical - MCS=3, NSS1 PER @ -81 dBm, typical - MCS=4, NSS1 PER @ -78 dBm, typical - MCS=5, NSS1 PER @ -73 dBm, typical - MCS=6, NSS1 PER @ -72 dBm, typical - MCS=7, NSS1 PER @ -71 dBm, typical - MCS=8, NSS1 PER @ -66 dBm, typical - MCS=9, NSS1 PER @ -65 dBm, typical - MCS=0, NSS2 PER @ -86 dBm, typical - MCS=9, NSS2 PER @ -61 dBm, typical - MCS=0, NSS1
PAGE 16
AP6356 Datasheet 1 5GHz(20MHz) Channel table Band (GHz) 5.15GHz~5.25GHz 5.25GHz~5.35GHz 5.5GHz~5.7GHz 5.725GHz~5.825GHz AMPAK Technology Inc. Doc. NO: Operating Channel Numbers 36 Channel center frequencies(MHz) 40 44 48 52 5200 5220 5240 5260 56 60 64 5280 5300 5320 100 104 108 112 116 120 5500 5520 5540 5560 5580 5600 124 128 132 136 140 149 153 157 161 5620 5640 5660 5680 5700 5745 5765 5785 5805 www.ampak.com.
PAGE 17
AP6356 Datasheet 6. Bluetooth Specification 6.1 Bluetooth Specification Conditions : VBAT=3.6V ; VDDIO=3.3V ; Temp:25°C Feature Description General Specification Bluetooth Standard Bluetooth V4.1 of 1, 2 and 3 Mbps. Host Interface UART Antenna Reference Small antennas with 0~2 dBi peak gain Frequency Band 2402 MHz ~ 2480 MHz Number of Channels 79 channels Modulation FHSS, GFSK, DPSK, DQPSK RF Specification Min. Typical. Output Power (Class 1.
PAGE 18
AP6356 Datasheet 7. Pin Assignments 7.1 Pin Outline < TOP VIEW > 7.
PAGE 19
AP6356 Datasheet 14 XTAL_IN I External Crystal in/ Single clock source in 15 WL_REG_ON I Low asserting reset for WiFi core 16 WL_HOST_WAKE O WLAN to wake-up HOST 17 SDIO_DATA_CMD I/O SDIO command line 18 SDIO_DATA_CLK I/O SDIO clock line 19 SDIO_DATA_3 I/O SDIO data line 3 20 SDIO_DATA_2 I/O SDIO data line 2 21 SDIO_DATA_0 I/O SDIO data line 0 22 SDIO_DATA_1 I/O SDIO data line 1 23 GND － Ground connections 24 PCIE_PME_L O PCIE power management event output 25 VIN
PAGE 20
AP6356 Datasheet 8. Dimensions 8.1 Physical Dimensions (Unit: mm) < TOP VIEW > < Side View > < TOP VIEW > AMPAK Technology Inc. Doc. NO: www.ampak.com.
PAGE 21
AP6356 Datasheet 8.2 Layout Recommendation (Unit: mm) < TOP VIEW > AMPAK Technology Inc. Doc. NO: www.ampak.com.
PAGE 22
AP6356 Datasheet 9. External clock reference External LPO signal characteristics Parameter Specification Units 32.768 kHz  30 ppm 30 - 70 % 1600 to 3300 mV, p-p Square-wave or sine-wave - Nominal input frequency Frequency accuracy Duty cycle Input signal amplitude Signal type  Input impedance >100k <5 pF Clock jitter (integrated over 300Hz – 15KHz) <1 Hz 0.7Vio - Vio V Output high voltage 9.1 SDIO Pin Description The module supports SDIO version 3.0 for all 1.
PAGE 23
AP6356 Datasheet 10. Host Interface Timing Diagram 10.1 Power-up Sequence Timing Diagram The module has signals that allow the host to control power consumption by enabling or disabling the Bluetooth, WLAN and internal regulator blocks. These signals are described below. Additionally, diagrams are provided to indicate proper sequencing of the signals for carious operating states. The timing value indicated are minimum required values: longer delays are also acceptable.
PAGE 24
AP6356 Datasheet WLAN=OFF, Bluetooth=OFF WLAN=ON, Bluetooth=OFF WLAN=OFF, Bluetooth=ON AMPAK Technology Inc. Doc. NO: www.ampak.com.
PAGE 25
AP6356 Datasheet 10.2 SDIO Default Mode Timing Diagram AMPAK Technology Inc. Doc. NO: www.ampak.com.
PAGE 26
AP6356 Datasheet 10.3 SDIO High Speed Mode Timing Diagram AMPAK Technology Inc. Doc. NO: www.ampak.com.
PAGE 27
AP6356 Datasheet 10.4 SDIO Bus Timing Specifications in SDR Modes Clock timing(SDR Modes) Card Input timing (SDR Modes) AMPAK Technology Inc. Doc. NO: www.ampak.com.
PAGE 28
AP6356 Datasheet Card output timing (SDR Modes up to 100MHz) Card output timing (SDR Modes 100MHz to 208MHz) AMPAK Technology Inc. Doc. NO: www.ampak.com.
PAGE 29
AP6356 Datasheet 10.5 SDIO Bus Timing Specifications in DDR50 Mode Data Timing AMPAK Technology Inc. Doc. NO: www.ampak.com.
PAGE 30
AP6356 Datasheet 11. Recommended Reflow Profile Referred to IPC/JEDEC standard. Peak Temperature : <250°C Number of Times : 2 times 250℃ 2.5°C/sec 40~70 sec 2.5℃/sec AMPAK Technology Inc. Doc. NO: www.ampak.com.
PAGE 31
AP6356 Datasheet 12. Package Information 12.1Label Label A Anti-static and humidity notice Label B MSL caution / Storage Condition Label C Inner box label . Label D Carton box label . AMPAK Technology Inc. Doc. NO: www.ampak.com.
PAGE 32
AP6356 Datasheet 12.2 Dimension AMPAK Technology Inc. Doc. NO: www.ampak.com.
PAGE 33
AP6356 Datasheet B Humidity indicator A Desiccant C C D AMPAK Technology Inc. Doc. NO: www.ampak.com.
PAGE 34
AP6356 Datasheet 12.3 MSL Level / Storage Condition ※NOTE : Accumulated baking time should not exceed 96hrs AMPAK Technology Inc. Doc. NO: www.ampak.com.
PAGE 35
Trace Antenna Design The crystal 37.4Mhz is feed to the AP6356S module as a reference clock. With the tuning of C21 and C56 to be 3.3pF determine the accuracy of the clock given to the wifi module was choosen so that the carrier frequency are under +/-20ppm. C132 and C92 are set to be 10pF and the trace going to the antenna are controlled to be 50ohm impedance.
PAGE 36
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.